Search

Tile Installation Supplies

View as Grid List
Sort by
Display per page

Do it Best Clear Thin Spread Floor Tile Adhesive (Quart)

SKU: 266132
UPC: 00009326260044
For installation of vinyl composition and asphalt tile. Water-resistant, nonflammable, dries to a colorless film. Tiles should only be applied after adhesive dries colorless. Apply adhesive with brush, roller, or trowel. Cover up to 200 Sq. Ft. per gallon. Clean up with soapy water when wet. Allow 72 hours drying time after floor tile installation before waxing.
$9.99

Do it Best Clear Thin Spread Floor Tile Adhesive (Gallon)

SKU: 266124
UPC: 00009326260051
For installation of vinyl composition and asphalt tile. Water-resistant, nonflammable, dries to a colorless film. Tiles should only be applied after adhesive dries colorless. Apply adhesive with brush, roller, or trowel. Cover up to 200 Sq. Ft. per gallon. Clean up with soapy water when wet. Allow 72 hours drying time after floor tile installation before waxing.
$22.99

Do it Best Off-White Multi Purpose Ceramic Tile Adhesive (Quart)

SKU: 266108
UPC: 00009326260129
For installation of ceramic and mosaic tile on floors and walls. Spreads easily, quick setting and is water-resistant. Meets specifications ANSI A136.1-1967 Type I. Do not use to apply lug-back tiles or to set ceramic fixtures. Fresh adhesive may be cleaned up with soap and water; dried adhesive may be removed with a razor blade. Coverage: Up to 75 Sq. Ft. per gallon on floors; up to 60 Sq. Ft. per gallon on walls. Color: Off-white.
$9.99

Do it Best Off-White Multi Purpose Ceramic Tile Adhesive (Gallon)

SKU: 266116
UPC: 00009326260136
For installation of ceramic and mosaic tile on floors and walls. Spreads easily, quick setting and is water-resistant. Meets specifications ANSI A136.1-1967 Type I. Do not use to apply lug-back tiles or to set ceramic fixtures. Fresh adhesive may be cleaned up with soap and water; dried adhesive may be removed with a razor blade. Coverage: Up to 75 Sq. Ft. per gallon on floors; up to 60 Sq. Ft. per gallon on walls. Color: Off-white.
$19.99

Custom Building Products White Dry 1 Lb. White Non-Sanded Tile Grout

SKU: 267716
UPC: 00010186081557
White, nonsanded dry tile grout. Portland cement-based, cures hard, is nonshrinking and durable. Specifically formulated for grouting porous-bodied floor and wall tiles with joints up to 1/8" wide. Suitable for use in commercial kitchens, schools, hospitals, residential floors, walls, showers (walls & floors) and countertops. Ideal for use with soft glazed, high glazed and marble tiles that could be scratched by sanded grouts.
$3.69

Custom Building Products White Dry 5 Lb. White Non-Sanded Tile Grout

SKU: 267724
UPC: 00010186081670
White, nonsanded dry tile grout. Portland cement-based, cures hard, is nonshrinking and durable. Specifically formulated for grouting porous-bodied floor and wall tiles with joints up to 1/8" wide. Suitable for use in commercial kitchens, schools, hospitals, residential floors, walls, showers (walls & floors) and countertops. Ideal for use with soft glazed, high glazed and marble tiles that could be scratched by sanded grouts.
$7.79

Custom Building Products Polyblend 10 Lb. Delorean Gray Non-Sanded Tile Grout

SKU: 288373
UPC: 00010186141763
Durable, non-shrinking grout accommodates tile joints up to 1/8" wide. Resists cracking, powdering and wear. Ideal for gloss finish, soft glazed ceramics or certain marble tiles which may be scratched by grouts containing sand. Can be used for interior or exterior installations, including floors, countertops, walls, ceilings, showers (walls & floors), fountains, and pools. May be used with the following tile types: Vitreous, semi-vitreous, or nonvitreous tile: ceramic, mosaic, quarry, cement body tiles, impervious porcelain and glass tile, brick and thin brick, precast terrazzo, and natural stone tile. Exceeds ANSI (American National Standards Institute) A118.6 standards. Rated for residential to extra heavy commercial use.
$16.79

Custom Building Products Polyblend 10 Lb. Light Smoke Non-Sanded Tile Grout

SKU: 266612
UPC: 00010186144764
Durable, non-shrinking grout accommodates tile joints up to 1/8" wide. Resists cracking, powdering and wear. Ideal for gloss finish, soft glazed ceramics or certain marble tiles which may be scratched by grouts containing sand. Can be used for interior or exterior installations, including floors, countertops, walls, ceilings, showers (walls & floors), fountains, and pools. May be used with the following tile types: Vitreous, semi-vitreous, or nonvitreous tile: ceramic, mosaic, quarry, cement body tiles, impervious porcelain and glass tile, brick and thin brick, precast terrazzo, and natural stone tile. Exceeds ANSI (American National Standards Institute) A118.6 standards. Rated for residential to extra heavy commercial use.
$16.79

Custom Building Products Polyblend 10 Lb. Antique White Non-Sanded Tile Grout

SKU: 288314
UPC: 00010186149769
Durable, non-shrinking grout accommodates tile joints up to 1/8" wide. Resists cracking, powdering and wear. Ideal for gloss finish, soft glazed ceramics or certain marble tiles which may be scratched by grouts containing sand. Can be used for interior or exterior installations, including floors, countertops, walls, ceilings, showers (walls & floors), fountains, and pools. May be used with the following tile types: Vitreous, semi-vitreous, or nonvitreous tile: ceramic, mosaic, quarry, cement body tiles, impervious porcelain and glass tile, brick and thin brick, precast terrazzo, and natural stone tile. Exceeds ANSI (American National Standards Institute) A118.6 standards. Rated for residential to extra heavy commercial use.
$16.79

Custom Building Products Polyblend 10 Lb. Sahara Tan Non-Sanded Tile Grout

SKU: 288330
UPC: 00010186153766
Durable, non-shrinking grout accommodates tile joints up to 1/8" wide. Resists cracking, powdering and wear. Ideal for gloss finish, soft glazed ceramics or certain marble tiles which may be scratched by grouts containing sand. Can be used for interior or exterior installations, including floors, countertops, walls, ceilings, showers (walls & floors), fountains, and pools. May be used with the following tile types: Vitreous, semi-vitreous, or nonvitreous tile: ceramic, mosaic, quarry, cement body tiles, impervious porcelain and glass tile, brick and thin brick, precast terrazzo, and natural stone tile. Exceeds ANSI (American National Standards Institute) A118.6 standards. Rated for residential to extra heavy commercial use.
$16.79

Custom Building Products Polyblend 10 Lb. Summer Wheat Non-Sanded Tile Grout

SKU: 288349
UPC: 00010186156767
Durable, non-shrinking grout accommodates tile joints up to 1/8" wide. Resists cracking, powdering and wear. Ideal for gloss finish, soft glazed ceramics or certain marble tiles which may be scratched by grouts containing sand. Can be used for interior or exterior installations, including floors, countertops, walls, ceilings, showers (walls & floors), fountains, and pools. May be used with the following tile types: Vitreous, semi-vitreous, or nonvitreous tile: ceramic, mosaic, quarry, cement body tiles, impervious porcelain and glass tile, brick and thin brick, precast terrazzo, and natural stone tile. Exceeds ANSI (American National Standards Institute) A118.6 standards. Rated for residential to extra heavy commercial use.
$16.79

Custom Building Products Polyblend 10 Lb. Nutmeg Brown Non-Sanded Tile Grout

SKU: 288381
UPC: 00010186157764
Durable, non-shrinking grout accommodates tile joints up to 1/8" wide. Resists cracking, powdering and wear. Ideal for gloss finish, soft glazed ceramics or certain marble tiles which may be scratched by grouts containing sand. Can be used for interior or exterior installations, including floors, countertops, walls, ceilings, showers (walls & floors), fountains, and pools. May be used with the following tile types: Vitreous, semi-vitreous, or nonvitreous tile: ceramic, mosaic, quarry, cement body tiles, impervious porcelain and glass tile, brick and thin brick, precast terrazzo, and natural stone tile. Exceeds ANSI (American National Standards Institute) A118.6 standards. Rated for residential to extra heavy commercial use.
$16.79

Custom Building Products Polyblend 10 Lb. Tobacco Brown Non-Sanded Tile Grout

SKU: 288357
UPC: 00010186158761
Durable, non-shrinking grout accommodates tile joints up to 1/8" wide. Resists cracking, powdering and wear. Ideal for gloss finish, soft glazed ceramics or certain marble tiles which may be scratched by grouts containing sand. Can be used for interior or exterior installations, including floors, countertops, walls, ceilings, showers (walls & floors), fountains, and pools. May be used with the following tile types: Vitreous, semi-vitreous, or nonvitreous tile: ceramic, mosaic, quarry, cement body tiles, impervious porcelain and glass tile, brick and thin brick, precast terrazzo, and natural stone tile. Exceeds ANSI (American National Standards Institute) A118.6 standards. Rated for residential to extra heavy commercial use.
$16.79

Custom Building Products Polyblend 10 Lb. Charcoal Non-Sanded Tile Grout

SKU: 288365
UPC: 00010186161761
Durable, non-shrinking grout accommodates tile joints up to 1/8" wide. Resists cracking, powdering and wear. Ideal for gloss finish, soft glazed ceramics or certain marble tiles which may be scratched by grouts containing sand. Can be used for interior or exterior installations, including floors, countertops, walls, ceilings, showers (walls & floors), fountains, and pools. May be used with the following tile types: Vitreous, semi-vitreous, or nonvitreous tile: ceramic, mosaic, quarry, cement body tiles, impervious porcelain and glass tile, brick and thin brick, precast terrazzo, and natural stone tile. Exceeds ANSI (American National Standards Institute) A118.6 standards. Rated for residential to extra heavy commercial use.
$16.79

Custom Building Products Polyblend 1 Lb. Linen Sanded Tile Grout

SKU: 260563
UPC: 00010186194301
Sanded grout is a dry, Portland cement based grout with silica sand, inorganic aggregates, and chemical. Produces hard, dense joints that resist shrinking, cracking, and wear. Formulated for durability, color consistency, and quick curing. Can be used in joints ranging from 1/8" to 1/2". Suitable for interior or exterior installations, including floors, countertops, walls, ceilings, showers (walls & floors), fountains, and pools. May be used with the following tile types: Vitreous, semi-vitreous, or nonvitreous tile: ceramic, mosaic, quarry, cement body tiles, impervious porcelain and glass tile, brick and thin brick, precast terrazzo, and natural stone tile. Meets or exceeds ANSI A118.6 standards. Rated for residential to extra heavy commercial use. Protected by MoldGard Technology to resist mold and mildew growth. Mix with clean water. Coverage will vary depending on tile size and joint width. Available in 7 lb. box and 25 lb. bag.
$6.99

Custom Building Products Polyblend 1 Lb. Bone Sanded Tile Grout

SKU: 260583
UPC: 00010186194318
Sanded grout is a dry, Portland cement based grout with silica sand, inorganic aggregates, and chemical. Produces hard, dense joints that resist shrinking, cracking, and wear. Formulated for durability, color consistency, and quick curing. Can be used in joints ranging from 1/8" to 1/2". Suitable for interior or exterior installations, including floors, countertops, walls, ceilings, showers (walls & floors), fountains, and pools. May be used with the following tile types: Vitreous, semi-vitreous, or nonvitreous tile: ceramic, mosaic, quarry, cement body tiles, impervious porcelain and glass tile, brick and thin brick, precast terrazzo, and natural stone tile. Meets or exceeds ANSI A118.6 standards. Rated for residential to extra heavy commercial use. Protected by MoldGard Technology to resist mold and mildew growth. Mix with clean water. Coverage will vary depending on tile size and joint width. Available in 7 lb. box and 25 lb. bag.
$7.19

Custom Building Products Polyblend 1 Lb. Haystack Sanded Tile Grout

SKU: 260607
UPC: 00010186194325
Sanded grout is a dry, Portland cement based grout with silica sand, inorganic aggregates, and chemical. Produces hard, dense joints that resist shrinking, cracking, and wear. Formulated for durability, color consistency, and quick curing. Can be used in joints ranging from 1/8" to 1/2". Suitable for interior or exterior installations, including floors, countertops, walls, ceilings, showers (walls & floors), fountains, and pools. May be used with the following tile types: Vitreous, semi-vitreous, or nonvitreous tile: ceramic, mosaic, quarry, cement body tiles, impervious porcelain and glass tile, brick and thin brick, precast terrazzo, and natural stone tile. Meets or exceeds ANSI A118.6 standards. Rated for residential to extra heavy commercial use. Protected by MoldGard Technology to resist mold and mildew growth. Mix with clean water. Coverage will vary depending on tile size and joint width. Available in 7 lb. box and 25 lb. bag.
$7.19

Custom Building Products Polyblend 1 Lb. Linen Non-Sanded Tile Grout

SKU: 260647
UPC: 00010186194332
Durable, non-shrinking grout accommodates tile joints up to 1/8" wide. Resists cracking, powdering and wear. Ideal for gloss finish, soft glazed ceramics or certain marble tiles which may be scratched by grouts containing sand. Can be used for interior or exterior installations, including floors, countertops, walls, ceilings, showers (walls & floors), fountains, and pools. May be used with the following tile types: Vitreous, semi-vitreous, or nonvitreous tile: ceramic, mosaic, quarry, cement body tiles, impervious porcelain and glass tile, brick and thin brick, precast terrazzo, and natural stone tile. Exceeds ANSI (American National Standards Institute) A118.6 standards. Rated for residential to extra heavy commercial use.
$6.99

Custom Building Products Polyblend 1 Lb. Bright White Non-Sanded Tile Grout

SKU: 260670
UPC: 00010186194349
Durable, non-shrinking grout accommodates tile joints up to 1/8" wide. Resists cracking, powdering and wear. Ideal for gloss finish, soft glazed ceramics or certain marble tiles which may be scratched by grouts containing sand. Can be used for interior or exterior installations, including floors, countertops, walls, ceilings, showers (walls & floors), fountains, and pools. May be used with the following tile types: Vitreous, semi-vitreous, or nonvitreous tile: ceramic, mosaic, quarry, cement body tiles, impervious porcelain and glass tile, brick and thin brick, precast terrazzo, and natural stone tile. Exceeds ANSI (American National Standards Institute) A118.6 standards. Rated for residential to extra heavy commercial use.
$6.99

Custom Building Products Polyblend 1 Lb. Natural Gray Sanded Tile Grout

SKU: 260544
UPC: 00010186194356
Sanded grout is a dry, Portland cement based grout with silica sand, inorganic aggregates, and chemical. Produces hard, dense joints that resist shrinking, cracking, and wear. Formulated for durability, color consistency, and quick curing. Can be used in joints ranging from 1/8" to 1/2". Suitable for interior or exterior installations, including floors, countertops, walls, ceilings, showers (walls & floors), fountains, and pools. May be used with the following tile types: Vitreous, semi-vitreous, or nonvitreous tile: ceramic, mosaic, quarry, cement body tiles, impervious porcelain and glass tile, brick and thin brick, precast terrazzo, and natural stone tile. Meets or exceeds ANSI A118.6 standards. Rated for residential to extra heavy commercial use. Protected by MoldGard Technology to resist mold and mildew growth. Mix with clean water. Coverage will vary depending on tile size and joint width. Available in 7 lb. box and 25 lb. bag.
$7.29

Custom Building Products Polyblend 7 Lb. Delorean Gray Sanded Tile Grout

SKU: 265985
UPC: 00010186203744
Sanded grout is a dry, Portland cement based grout with silica sand, inorganic aggregates, and chemical. Produces hard, dense joints that resist shrinking, cracking, and wear. Formulated for durability, color consistency, and quick curing. Can be used in joints ranging from 1/8" to 1/2". Suitable for interior or exterior installations, including floors, countertops, walls, ceilings, showers (walls & floors), fountains, and pools. May be used with the following tile types: Vitreous, semi-vitreous, or nonvitreous tile: ceramic, mosaic, quarry, cement body tiles, impervious porcelain and glass tile, brick and thin brick, precast terrazzo, and natural stone tile. Meets or exceeds ANSI A118.6 standards. Rated for residential to extra heavy commercial use. Protected by MoldGard Technology to resist mold and mildew growth. Mix with clean water. Coverage will vary depending on tile size and joint width. Available in 7 lb. box and 25 lb. bag.
$12.29

Custom Building Products Polyblend 7 Lb. Light Smoke Sanded Tile Grout

SKU: 265799
UPC: 00010186206745
Sanded grout is a dry, Portland cement based grout with silica sand, inorganic aggregates, and chemical. Produces hard, dense joints that resist shrinking, cracking, and wear. Formulated for durability, color consistency, and quick curing. Can be used in joints ranging from 1/8" to 1/2". Suitable for interior or exterior installations, including floors, countertops, walls, ceilings, showers (walls & floors), fountains, and pools. May be used with the following tile types: Vitreous, semi-vitreous, or nonvitreous tile: ceramic, mosaic, quarry, cement body tiles, impervious porcelain and glass tile, brick and thin brick, precast terrazzo, and natural stone tile. Meets or exceeds ANSI A118.6 standards. Rated for residential to extra heavy commercial use. Protected by MoldGard Technology to resist mold and mildew growth. Mix with clean water. Coverage will vary depending on tile size and joint width. Available in 7 lb. box and 25 lb. bag.
$12.29

Custom Building Products Polyblend 25 Lb. Sandstone Sanded Tile Grout

SKU: 269719
UPC: 00010186210803
Sanded grout is a dry, Portland cement based grout with silica sand, inorganic aggregates, and chemical. Produces hard, dense joints that resist shrinking, cracking, and wear. Formulated for durability, color consistency, and quick curing. Can be used in joints ranging from 1/8" to 1/2". Suitable for interior or exterior installations, including floors, countertops, walls, ceilings, showers (walls & floors), fountains, and pools. May be used with the following tile types: Vitreous, semi-vitreous, or nonvitreous tile: ceramic, mosaic, quarry, cement body tiles, impervious porcelain and glass tile, brick and thin brick, precast terrazzo, and natural stone tile. Meets or exceeds ANSI A118.6 standards. Rated for residential to extra heavy commercial use. Protected by MoldGard Technology to resist mold and mildew growth. Mix with clean water. Coverage will vary depending on tile size and joint width. Available in 7 lb. box and 25 lb. bag.
$14.99

Custom Building Products Polyblend 7 Lb. Natural Gray Sanded Tile Grout

SKU: 267775
UPC: 00010186211749
Sanded grout is a dry, Portland cement based grout with silica sand, inorganic aggregates, and chemical. Produces hard, dense joints that resist shrinking, cracking, and wear. Formulated for durability, color consistency, and quick curing. Can be used in joints ranging from 1/8" to 1/2". Suitable for interior or exterior installations, including floors, countertops, walls, ceilings, showers (walls & floors), fountains, and pools. May be used with the following tile types: Vitreous, semi-vitreous, or nonvitreous tile: ceramic, mosaic, quarry, cement body tiles, impervious porcelain and glass tile, brick and thin brick, precast terrazzo, and natural stone tile. Meets or exceeds ANSI A118.6 standards. Rated for residential to extra heavy commercial use. Protected by MoldGard Technology to resist mold and mildew growth. Mix with clean water. Coverage will vary depending on tile size and joint width. Available in 7 lb. box and 25 lb. bag.
$12.29

Custom Building Products Polyblend 7 Lb. Antique White Sanded Tile Grout

SKU: 267732
UPC: 00010186212746
Sanded grout is a dry, Portland cement based grout with silica sand, inorganic aggregates, and chemical. Produces hard, dense joints that resist shrinking, cracking, and wear. Formulated for durability, color consistency, and quick curing. Can be used in joints ranging from 1/8" to 1/2". Suitable for interior or exterior installations, including floors, countertops, walls, ceilings, showers (walls & floors), fountains, and pools. May be used with the following tile types: Vitreous, semi-vitreous, or nonvitreous tile: ceramic, mosaic, quarry, cement body tiles, impervious porcelain and glass tile, brick and thin brick, precast terrazzo, and natural stone tile. Meets or exceeds ANSI A118.6 standards. Rated for residential to extra heavy commercial use. Protected by MoldGard Technology to resist mold and mildew growth. Mix with clean water. Coverage will vary depending on tile size and joint width. Available in 7 lb. box and 25 lb. bag.
$12.29
All Categories