Steel bracket and post for Building Guardrail System with 2x4 lumber on steep slope residential roofing. Installs and removes like roof brackets on eave edge (guttered edge) of pitches from 4/12 to 16/12. Provides fall protection, slide-guard, and toeboard. Maximum spacing 8' apart and interleaves with shingles. Slotted for easy removal. Tested to comply with OSHA.
Keep your work area organized and clutter free with the Jobsite Series Baker Tool shelf. The tray can be installed easily on any Baker style scaffolds and can hold up to 50 lb. Includes paint can size depressed areas for quarts, gallon or 5 gallon pails and large cup and depressed area with easy grab rounded corners. It can be installed facing inside or outside.
The MetalTech 5 In. Caster with Lock offers a heavy-duty, double-locking caster wheel. It comes with a locking pin to secure the caster to the frame leg and to the outrigger. Designed to prevent damage to floor surfaces, the smooth rolling caster is non-marking and easily roll over extension cords for safe, convenient use around the jobsite. The Stem hole diameter is 0.047 In., stem distance from caster is 2-1/2 In. and stem height is 4 In. Meets ANSI, OSHA and CSA standards for safety.
Caster lock pin is used to lock scaffolding and accessories together, and lock a 5 In. caster in place. Durable steel construction with zinc-plated finish for extra protection. Corrosion resistant to withstand outdoor use.
This MetalTech outrigger set is designed to provide extra stability for rolling scaffolds. Includes four 5" double lock casters and eight locking pins. Easy assembly; meets OSHA (Occupational Safety and Health Administration) & CSA (Canadian Standards Association) requirements. Set of 4. Includes (4) outriggers (4) 5" double lock casters (8) locking pins.
The MetalTech Scaffolding Cross Brace for Outriggers. Designed for outdoor use. Easy to install on each leg of any scaffold. 1 In. O.D. galvanized steel tube.16 gauge.
The replacement stainless steel spring clip is used with the MetalTech coupling pin to lock into the top tube of both standard and arch scaffold frames. Spring steel nipple design for easy installation. Made out of stainless steel for maximum corrosion resistance.
This MetalTech coupling pin and spring and designed for use with stacking scaffold frames. The pin is 1-3/8" D x 9" H with a 1-5/8" D collar and rugged all-metal construction. Coupling pin and spring lock.
The MetalTech adjustable leveling jack is ideal for ensuring a solid foundation for scaffolding frames and can be used with standard or arched frames. Meets OSHA (Occupational Safety and Health Administration) & CSA (Canadian Standards Association) requirements. 24" galvanized screw jack with socket (hollow). Adjusts over a 16" range. Jacks are especially recommended when scaffolding is assembled along an external wall.
MetalTech offers this durable heavy-duty caster that is designed to work with its scaffolding systems. The caster features double locking wheels and rugged construction including a cast iron hub with grease fitting adapter. For use on concrete floors.
The galvanized guard rail is used with MetalTech guardrail posts Model No. M-MGPUSL (SKU 770263) for safety and security on exterior scaffolding structures. A minimum of (2) guardrails (upper and midrail) must be installed on each side of the scaffold. Guardrails must be installed along the perimeter of all scaffold structures of a height of 10 ft. or more to prevent accidental falls.
The galvanized guard rail is used with MetalTech guardrail posts Model No. M-MGPUSL (SKU 770263) for safety and security on exterior scaffolding structures. A minimum of (2) guardrails (upper and midrail) must be installed on each side of the scaffold. Guardrails must be installed along the perimeter of all scaffold structures of a height of 10 ft. or more to prevent accidental falls.
MetalTech guard rail post with support is built with a rugged steel tube construction. This item is sold individually but 4 posts are required for each scaffolding set. Convenient wedge clamp on the support is easy to install by locking onto the attached scaffold frame. Guardrails Model Nos. M-MGR5 (SKU 770606) or M-MGR7 (SKU 770613) are not included must be installed along the perimeter of all scaffold structures of a height of 10 ft. or more to prevent accidental falls.
This MetalTech pig tail locking device is an essential item for stacking scaffolding frames and attaching casters. This rugged locking device is safe and secure and features sturdy steel construction.
Safety Boot Guardrail System provides a method for constructing versatile, freestanding, temporary guardrail and stair rail systems that exceed OSHA (Occupational Safety and Health Administration) guardrail regulations. The fully reusable Safety Boot features a unique design that allows toe boards to be inserted quickly and easily for complete OSHA required toe board protection. The design creates rigid anchorage points for freestanding posts complete with slots for toe boards to be inserted quickly. Can be used for edge protection on most structures by building out an OSHA compliant guardrail system using job site tools and construction grade 2x4 lumber material. Needs no bracing, and anchors into most materials, including concrete. Meets OSHA's Fall Protection Regulation (Standards - 29 CFR 1926.502. Safety Boots are molded in one piece from a durable, high-impact, safety yellow polymer. Includes 4 safety boot units, installation instructions with detailed illustrations, 1 hex drill adapter, Stress Engineering Report Summary, fastener specifications for various sub-floor materials, and specified fender washers.