Diaphragm-type pre-pressurized expansion tank specifically designed for potable hot water systems. These tanks control water pressure build-up and eliminate relief valve spillage caused by thermal expansion when water is heated. 3/4" Male pipe thread connection. Requires no maintenance. Required by code in many counties and states. Use model No. 993-024 for self-piercing valve. Specifications: Models G5, G5L, G12, G12L; Maximum allowable working temperature: 200 deg. F.; Standard factory precharge: 40PSIG (Relief valve must be set at 150PSIG). Maximum pressure maintained at least 10% below relief valve setting (150PSIG); Models are listed with IAPMO (International Association of Plumbing and Mechanical Officials) and SBCCI (Southern Building Code Congress International); Models are NSF (National Sanitation Foundation) Listed for liner only.
Diaphragm-type pre-pressurized expansion tank specifically designed for potable hot water systems. These tanks control water pressure build-up and eliminate relief valve spillage caused by thermal expansion when water is heated. 3/4" Male pipe thread connection. Requires no maintenance. Required by code in many counties and states. Use model No. 993-024 for self-piercing valve. Specifications: Models G5, G5L, G12, G12L; Maximum allowable working temperature: 200 deg. F.; Standard factory precharge: 40PSIG (Relief valve must be set at 150PSIG). Maximum pressure maintained at least 10% below relief valve setting (150PSIG); Models are listed with IAPMO (International Association of Plumbing and Mechanical Officials) and SBCCI (Southern Building Code Congress International); Models are NSF (National Sanitation Foundation) Listed for liner only.
Silicon bronze valve body and poppet assembly. Furnished with buna-n O-ring, stainless steel spring, stainless steel washer, and stainless steel locknut. Check valves have a working pressure of 400 P.S.I. FPT. x FPT. Code approved in California.
Silicon bronze valve body and poppet assembly. Furnished with buna-n O-ring, stainless steel spring, stainless steel washer, and stainless steel locknut. Check valves have a working pressure of 400 P.S.I. FPT. x FPT. Code approved in California.
Silicon bronze valve body and poppet assembly. Furnished with buna-n O-ring, stainless steel spring, stainless steel washer, and stainless steel locknut. Check valves have a working pressure of 400 P.S.I. FPT. x FPT. Code approved in California.
1" x 1-1/4" Female/Male threads check valve. Silicon bronze cast body and silicon bronze cast poppet. Silicon bronze components contain less than .05% (1/20 of 1%) lead. check valves furnished with Buna-N O-ring, stainless steel spring, stainless steel washer, and stainless steel locknut. All check valves have a working pressure of 400 P.S.I.
Silicon bronze valve body and poppet assembly. Furnished with buna-n O-ring, stainless steel spring, stainless steel washer, and stainless steel locknut. Check valves have a working pressure of 400 P.S.I. FPT. x FPT. Code approved in California.
Silicon bronze valve body and poppet assembly. Furnished with buna-n O-ring, stainless steel spring, stainless steel washer, and stainless steel locknut. Check valves have a working pressure of 400 P.S.I. FPT. x FPT. Code approved in California.
Maintains proper relation of volume of air and quantity of water in the pressure tank. Body threaded for tank connection. Includes 1/4" tap for pressure gauge.
Low lead check valve, bronze valve body and poppet assemble. Furnished with Buna-A O-ring, stainless steel spring, and locknut. Working pressure of 200 psi (pounds per square inch) female threads. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.
Low lead check valve, bronze valve body and poppet assemble. Furnished with Buna-A O-ring, stainless steel spring, and locknut. Working pressure of 200 psi (pounds per square inch) female threads. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.
Low lead check valve, bronze valve body and poppet assemble. Furnished with Buna-A O-ring, stainless steel spring, and locknut. Working pressure of 200 psi (pounds per square inch) female threads. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.
Low lead check valve, bronze valve body and poppet assemble. Furnished with Buna-A O-ring, stainless steel spring, and locknut. Working pressure of 200 psi (pounds per square inch) female threads. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.
Low lead check valve, bronze valve body and poppet assemble. Furnished with Buna-A O-ring, stainless steel spring, and locknut. Working pressure of 200 psi (pounds per square inch) female threads. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.
Heavy-duty oil-filled 1/2 HP, 115V motor for superior cooling and bearing lubrication. Cast-iron motor housing provides strength, efficient motor heat transfer, and longer bearing life. 1-piece cast-iron base and screen does not distort and allows for easy installation of discharge pipe and check valve. Strain relieved, 8' grounded power cord. Thermal overload protection automatically shuts motor off when over loaded and resets automatically as motor cools. Mercury magnetic switch. 1-1/2" discharge pipe. Minimum sump pit size, 10" diameter, 12" depth. 2 year limited warranty.
1/6 HP portable utility pump, molded pump housing will not rust or corrode, pumps up to 16 GPM capacity. Removes water to within 1/8" of surface. Fully submersible, completely portable, weighs 8 lbs. Overload protected motor. Adapts to standard garden hose. 3/4" NPT outlet allows for plastic pipe installation. Dimensions: 7-3/4" H. x 6-1/4" W. 1 year limited warranty. Air cooled motor. Fits into 7" opening.
Submersible Sump Pump with vertical switch. Cast aluminum body resist heat with built in thermal overload protection. Fits in a 12" Sump Basin. 1 1/2" NPT discharge. 9' double sealed cord. 1 year limited warranty.
1/4 HP (horsepower) submersible sump pump. Cast aluminum body resists corrosion, stress, and heat. Built-in thermal overload protection. 1-1/2" NPT (National Pipe Thread) discharge with a 9' double sealed cord. 1 year limited warranty. Pumps 2200 GPH (gallons per hour) at a 5' lift, 1620 GPH at a 10' lift.
115V, 60 cycle single phase motor. Overload protected. 3 wire waterproof cord and plug. Enclosed positive switch, corrosion- resistant float rod with adjustable stops. Minimum size of sump pit 12" diameter. Do it thermoplastic base, 1-1/4" discharge, (1/3 H.P.), 1 year limited warranty. 3000 GPH at 5 Ft.
1/3 HP Cast Iron Sewage Pump with thermal overload to protect against overheating. Standard tethered switch provides for automatic operation. Epoxy-coated, cast iron design dissipates motor heat to ensure long pump life. Bottom suction inlet with a vortex impeller. 2 In. discharge with a 2 In. solids-pumping capacity. Ceramic and carbon seal for reliable service and extended life. Temperature rating 130 degrees. Waterproof cord with grounded plug. Weight: 21 Lb. 1 year limited warranty.
Rugged cast-iron construction makes this 3/10 HP pump ideal for heavy-duty sump pump applications and for grey water effluent applications. Overload protected oil filled motor, 2-pole float operated switch for reliable operation and long life. 1-1/2" discharge pumps up to 1/2" solids. Not intended for pumping unprocessed household sewage or as a sewage ejector pump. 2 year limited warranty. For replacement switch see Model No KH82 (SKU 417076)