Protractors & Center Finders

View as Grid List
Sort by
Display per page

Empire Plastic Magnetic Protractor

SKU: 303359
UPC: 00015812000360
Magnetic base and back. Easy reading dial with adjustable angle pointer. 4-1/2 In. W x 5 In. H

General Tools Steel Square Head Protractor

SKU: 319120
UPC: 00038728220189
Made of ground stainless steel. Permanently etched graduations from 0 to 180 deg. in opposite directions. 3-3/8 In. (inch) x 2 In. head. 6 In. adjustable protractor arm locks onto desired position with knurled thumb nut.

General Tools Plastic Protractor and Angle Finder

SKU: 320536
UPC: 00038728221483
Protractor/angle finder to measure and mark the degrees of an angle on outside, inside, and slopped angles. Fine black graduations from 0 degree to 165 degree in opposite directions. Brass lock nut.

Johnson Level Plastic Magnetic Protractor Angle Locator

SKU: 365919
UPC: 00049448700004
Place the angle locator onto any surface and find the angle. Angle measuring tool includes an extra-strong ceramic magnet on 1 end for use on ferrous metals and a V-groove edge on the other to easily lay over pipe and conduit. High-impact molded body and inch/metric graduations. Easy-to-read increments read 0 degree to 90 degree in all 4 quadrants printed on durable acrylic lens. 4-3/4 In. W x 4-3/4 In. H

Johnson Level Plastic Magnetic Digital Protractor Angle Locator

SKU: 303847
UPC: 00049448860005
Automatic LCD (liquid crystal display) backlight. Automatic digit inversion for overhead measurements. Measures in both absolute and relative measurements. Angle display in degrees. Working range of angle measurement 0 x 90 degrees. Magnetic base. Accuracy +/- 0.1 Deg for 0 Deg and 90 Deg, and +/- 0.2 Deg. Working range 4 x 90 Deg. Working temperature 32 Deg F to 122 Deg F. Includes (1) AAA alkaline battery, instruction manual, soft-sided pouch.

Starrett Plastic Miter Protractor

SKU: 326294
UPC: 00049659122558
The Starrett miter protractor is constructed from durable engineered plastic and has a nonstick coated O-ring for smooth and precise operation. This protractor is economically priced, eliminates calculations, reduces errors, and provides greater accuracy for miter cuts. Simply set your saw to the angle shown on the protractor. Upside down or backwards, the reading is always correct. This easy-to-use tool has 2 scales. For a miter cut, the arrow on the handle points to the angle on the inner scale, and for a single cut, the center arrow points to the angle on the outer scale. 7 In. (Inch) L.

Starrett ProSite Aluminum Miter Protractor

SKU: 322145
UPC: 00049659677522
5-in-1 combination protractor performs miter cuts, single cuts, compound cut conversion table, protractor and roof pitches. Takes error-prone calculations out of the process of miter cuts. Simply set your saw to the angle that you read. Upside down or backwards, the reading is always correct. This easy-to-use tool has 2 scales. The red scale and arrow show the angle for a miter joint, while the black arrows and scale provide the angle to fit a single workpiece to an angle. It's ideal for carpenters, plumbers, and all building trades that require the measuring and transferring of angles. 12 In. (inch) L.

Robert Larson Plastic Center Finder

SKU: 315581
UPC: 00744391116840
Finds exact center in seconds with no calculations. Gives center of round, square, hexagon, and octagon stock for turning in a lathe or other purposes. Maximum 8 In. (inch) circle and octagon, 8 In. square, and 5-3/4 In. hexagon.
All Categories