Search

Masonry Sealers & Waterproofers

View as Grid List
Sort by
Display per page

Seal Krete Clear-Seal Low VOC Acrylic Concrete Sealer, 1 Gal.

SKU: 795379
UPC: 00015944365016
A clear, urethane-fortified acrylic sealer developed to provide a low-gloss premium finish to painted, stained, or bare concrete. It is durable, long-wearing, scratch-resistant, stain-resistant, and it extends paint life to interior and exterior floors and garage floors. It also protects against moisture damage and enhances the natural color of brick, slate, stone, exposed aggregate, saltillo, clay pavers, and stamped concrete. New concrete must have cured for a minimum of 30 days. Freshly painted surfaces must have cured for a minimum of 72 hours. Apply in light, even coats with a solvent resist roller (1/4" nap on smooth surfaces or 3/8" nap for rough surfaces) or pump sprayer set at a fine spray. Covers approximatly 150 to 500 sq. ft. per gallon, depending on surface porosity. May add anti-skid additive to reduce slips. Dries in 2 hours and will accept vehicle traffic in 72 hours. Clean with soap and water.
$36.49

Rust-Oleum RockSolid Semi-Transparent Concrete Stain, 1 Gal., Tint Base

SKU: 771985
UPC: 00020066162085
Rust-Oleum RockSolid Semi-Transparent Concrete Stain creates the marbleized look of acid-stained concrete. Water-based formula gives ordinary concrete a unique finish that is both rugged and trendy. No chipping or peeling. Coverage area: 250 to 400 Sq. Ft. for bare or smooth, 175 to 200 Sq. Ft. for rough or porous concrete. Customize the tint base to the color of your choice.
$31.99

Rust-Oleum Moisture Stop Fortifying Concrete Sealer, 1 Gal., Clear

SKU: 771997
UPC: 00020066322540
Rust-Oleum Moisture Stop penetrates into concrete and reacts with the free calcium and water to form a gel in cracks, pores, and capillaries to protect against the ingress of water and contaminants. This allows surfaces that were previously uncoatable due to moisture, to be coated. Strengthens and seals from the inside out. Dries to touch in 45 minutes. For use with all concrete coatings. Soap and water clean-up.
$18.99

Rust-Oleum RockSolid Wet Look Concrete Sealer, 1 Gal., Clear

SKU: 771983
UPC: 00020066352073
Seal and protect concrete and masonry surfaces from the damaging effects of water, chemicals, and UV light. Excellent water repellency. Water-base, film-form formula provides a protective barrier to keep water out, protect against stains, and extend the life of your concrete. Coverage area: 200 to 400 Sq. Ft. for a single coat. Suitable for use on driveways, patios, walkways, pool decks, basements, and more.
$31.99

Rust-Oleum RockSolid Natural Look Concrete Sealer, 1 Gal., Clear

SKU: 771981
UPC: 00020066352080
Seal and protect concrete and masonry surfaces from the damaging effects of water, chemicals, and UV light. Excellent water repellency. Water-base, film-form formula provides a protective barrier to keep water out, protect against stains, and extend the life of your concrete. Coverage area: 200 to 400 Sq. Ft. for a single coat. Suitable for use on driveways, patios, walkways, pool decks, basements, and more.
$31.99

Thompson's WaterSeal Clear Natural Masonry Waterproofer, 1.2 Gal.

SKU: 770925
UPC: 00032053231117
Provide waterproofing protection for all masonry surfaces including pavers, brick, concrete, stone, stucco, clay, and quarry tile. Prevents water damage, and coating resists mildew and UV (ultraviolet) damage. Helps maintain the natural color of the surface and dries clear. Allow at least 24 hours to dry, drying times may vary.
$22.99

Damtite 7 Lb. White Powder Masonry Waterproofer

SKU: 263805
UPC: 00037438010714
A Portland cement-based waterproofing coating for sealing, protecting, and decorating vertical walls constructed of concrete, masonry, brick, or stucco. Just add the powder to water. For previously painted or nonporous surfaces use Damtite Bonding Liquid. It eliminates dampness and resists mildew, flaking, or chalking while beautifying and sealing all pores and voids. Unlike ready-mixed paints that can only be applied to dry surfaces, it is made to be used on damp walls. Safe for coating drinking water holding tanks or cisterns, birdbaths, and fountains. Reduces radon gas penetration through concrete block walls.
$22.99

Damtite 21 Lb. White Powder Masonry Waterproofer

SKU: 275972
UPC: 00037438012114
A Portland cement-based waterproofing coating for sealing, protecting, and decorating vertical walls constructed of concrete, masonry, brick, or stucco. Just add the powder to water. For previously painted or nonporous surfaces use Damtite Bonding Liquid. It eliminates dampness and resists mildew, flaking, or chalking while beautifying and sealing all pores and voids. Unlike ready-mixed paints that can only be applied to dry surfaces, it is made to be used on damp walls. Safe for coating drinking water holding tanks or cisterns, birdbaths, and fountains. Reduces radon gas penetration through concrete block walls.
$52.99

Damtite 45 Lb. White Powder Masonry Waterproofer

SKU: 275980
UPC: 00037438014514
A Portland cement-based waterproofing coating for sealing, protecting, and decorating vertical walls constructed of concrete, masonry, brick, or stucco. Just add the powder to water. For previously painted or nonporous surfaces use Damtite Bonding Liquid. It eliminates dampness and resists mildew, flaking, or chalking while beautifying and sealing all pores and voids. Unlike ready-mixed paints that can only be applied to dry surfaces, it is made to be used on damp walls. Safe for coating drinking water holding tanks or cisterns, birdbaths, and fountains. Reduces radon gas penetration through concrete block walls.
$94.99

Damtite 45 Lb. Gray Powder Masonry Waterproofer

SKU: 263725
UPC: 00037438024513
A Portland cement-based waterproofing coating for sealing, protecting, and decorating vertical walls constructed of concrete, masonry, brick, or stucco. Just add the powder to water. For previously painted or nonporous surfaces use Damtite Bonding Liquid. It eliminates dampness and resists mildew, flaking, or chalking while beautifying and sealing all pores and voids. Unlike ready-mixed paints that can only be applied to dry surfaces, it is made to be used on damp walls. Safe for coating drinking water holding tanks or cisterns, birdbaths, and fountains. Reduces radon gas penetration through concrete block walls.
$82.99

Quikrete Clear Satin Concrete Sealer, 1 Gal.

SKU: 276472
UPC: 00039645873007
Acrylic water-based formula that enhances the durability of concrete and masonry. Promotes proper curing by retaining moisture in new concrete, eliminating the need for water curing. Water repellent formula seals surfaces against deteriorating effects of salt, grease, oil, etc. Clean up is faster and easier on surfaces treated. Ready-to-use, milky white color dries to clear satin finish. 1 gallon will cover approximately 200 sq. ft. at a uniform thickness. 2 coats are recommended. Exceeds ASTM C 309 requirements for concrete curing compounds. Gallon bottle.
$28.99

Homax Clear Natural Wet-Look Concrete Sealer, 1 Gal.

SKU: 785608
UPC: 00041072006132
Cure Seal Gloss Wet Look is a clear concrete sealer that beautifies and protects old or new concrete, brick, exposed aggregate, flagstone or quarry tile from oil, grease, or water stains. Covers up to 350 sq. ft. per gallon over smooth troweled concrete. Coverage over rough porous surfaces can be from 100 sq. ft. per gallon to 250 sq. ft. per gallon depending on the porosity of the surface. Cure Seal slightly darkens masonry surfaces giving it a natural wet-look that will not yellow. Apply when surface water has dried and able to hold weight. Recoat 1 to 3 hours to achieve level of desired sheen. 2 coats are recommended. Allow 3 hours between coats.
$26.99

Drylok Clear Masonry Waterproofer, 1 Gal.

SKU: 770863
UPC: 00079941209131
Non-pigmented waterproofer formulated for floor and wall surfaces is easy to clean and leaves a non-yellowing finish. Perfect for waterproofing interior and exterior concrete floors, poured concrete walls, split-faced block, concrete and cinder block, stone, brick, stucco, and pre-cast decorative items. Incorporates ISP CleanGuard, environmentally safe green biocides, to resist the growth of mildew on the dry paint film. Tested in accordance to requirements of ASTM D-7088 (American Society for Testing and Materials) Resistance to Hydrostatic Pressure at 4 psi (pounds per square inch) and ASTM D-6904 Resistance to Wind Driven Rain of 98 mph.
$42.49

Drylok Clear Masonry Waterproofer, 5 Gal.

SKU: 770867
UPC: 00079941209155
Non-pigmented waterproofer formulated for floor and wall surfaces is easy to clean and leaves a non-yellowing finish. Perfect for waterproofing interior and exterior concrete floors, poured concrete walls, split-faced block, concrete and cinder block, stone, brick, stucco, and pre-cast decorative items. Incorporates ISP CleanGuard, environmentally safe green biocides, to resist the growth of mildew on the dry paint film. Tested in accordance to requirements of ASTM D-7088 (American Society for Testing and Materials) Resistance to Hydrostatic Pressure at 4 psi (pounds per square inch) and ASTM D-6904 Resistance to Wind Driven Rain of 98 mph.
$204.99

Drylok Clear Natural Look Concrete Sealer, 1 Gal.

SKU: 795224
UPC: 00079941221133
Just like natural and man-made stone, concrete, stucco and masonry are porous materials that will start to break down, dust, pit, crack, and/or stain when subjected to weather, water, oil, and UV rays. The only way to prevent damage and deterioration is to protect your surfaces with a good quality sealer. Specially formulated DRYLOK® Natural Look Sealer soaks right in and provides an invisible coat of protection that looks beautiful and natural. Use on interior and exterior masonry surfaces, including concrete driveways, basement floors, garage floors, concrete sidewalks, patios, terrazzo, brick, and slate. DRYLOK® Natural Look Sealer protects exterior masonry surfaces, minimizing concrete dusting, cracking, and pock-marking. Water base, one-coat sealer. Ideal masonry primer. Hardens concrete.
$20.99

Drylok White Latex Masonry Waterproofer, 1 Qt.

SKU: 791954
UPC: 00079941275129
Formulated for waterproofing all interior, exterior, above or below grade masonry walls, cinder and concrete blocks, stucco, brick, retaining walls, basements, swimming pools, bird baths, fish ponds, and foundations. Stops water under pressure up to 10 P.S.I. per sq. in. That's greater than a column of water 22' high. Chalky (efflorescence) deposits must be removed by etching the surface. Alkali-resistant and may be applied on slightly damp surfaces below ground, but best results are obtained on dry surfaces. Low odor formulation is VOC/VOS compliant and cleans up with soap and water. Applies easily with brush or roller. Covers approximately 75 to 125 sq. ft. per gallon. Latex based Drylok is backed by a 10 year manufacturer warranty.
$10.79

Drylok White Latex Masonry Waterproofer, 1 Gal.

SKU: 772961
UPC: 00079941275136
Formulated for waterproofing all interior, exterior, above or below grade masonry walls, cinder and concrete blocks, stucco, brick, retaining walls, basements, swimming pools, bird baths, fish ponds, and foundations. Stops water under pressure up to 10 P.S.I. per sq. in. That's greater than a column of water 22' high. Chalky (efflorescence) deposits must be removed by etching the surface. Alkali-resistant and may be applied on slightly damp surfaces below ground, but best results are obtained on dry surfaces. Low odor formulation is VOC/VOS compliant and cleans up with soap and water. Applies easily with brush or roller. Covers approximately 75 to 125 sq. ft. per gallon. Latex based Drylok is backed by a 10 year manufacturer warranty.
$25.99

Drylok White Latex Masonry Waterproofer, 2 Gal.

SKU: 782012
UPC: 00079941275143
Formulated for waterproofing all interior, exterior, above or below grade masonry walls, cinder and concrete blocks, stucco, brick, retaining walls, basements, swimming pools, bird baths, fish ponds, and foundations. Stops water under pressure up to 10 P.S.I. per sq. in. That's greater than a column of water 22' high. Chalky (efflorescence) deposits must be removed by etching the surface. Alkali-resistant and may be applied on slightly damp surfaces below ground, but best results are obtained on dry surfaces. Low odor formulation is VOC/VOS compliant and cleans up with soap and water. Applies easily with brush or roller. Covers approximately 75 to 125 sq. ft. per gallon. Latex based Drylok is backed by a 10 year manufacturer warranty.
$52.99

Drylok White Latex Masonry Waterproofer, 5 Gal.

SKU: 782074
UPC: 00079941275150
Formulated for waterproofing all interior, exterior, above or below grade masonry walls, cinder and concrete blocks, stucco, brick, retaining walls, basements, swimming pools, bird baths, fish ponds, and foundations. Stops water under pressure up to 10 P.S.I. per sq. in. That's greater than a column of water 22' high. Chalky (efflorescence) deposits must be removed by etching the surface. Alkali-resistant and may be applied on slightly damp surfaces below ground, but best results are obtained on dry surfaces. Low odor formulation is VOC/VOS compliant and cleans up with soap and water. Applies easily with brush or roller. Covers approximately 75 to 125 sq. ft. per gallon. Latex based Drylok is backed by a 10 year manufacturer warranty.
$114.99

Drylok Gray Latex Masonry Waterproofer, 1 Gal.

SKU: 794240
UPC: 00079941276133
Formulated for waterproofing all interior, exterior, above or below grade masonry walls, cinder and concrete blocks, stucco, brick, retaining walls, basements, swimming pools, bird baths, fish ponds, and foundations. Stops water under pressure up to 10 P.S.I. per sq. in. That's greater than a column of water 22' high. Chalky (efflorescence) deposits must be removed by etching the surface. Alkali-resistant and may be applied on slightly damp surfaces below ground, but best results are obtained on dry surfaces. Low odor formulation is VOC/VOS compliant and cleans up with soap and water. Applies easily with brush or roller. Covers approximately 75 to 125 sq. ft. per gallon. Latex based Drylok is backed by a 10 year manufacturer warranty.
$25.99

Drylok White Extreme Basement & Masonry Waterproofer Concrete Sealer, 1 Gal.

SKU: 784910
UPC: 00079941286132
Smoother waterproof paint is perfect for the most demanding conditions. Fully transferable 15 year warranty. Ideal for interior, exterior, above or below grade masonry walls, basement walls, retaining walls, foundations, landscape walls, cinder blocks, concrete blocks, bare concrete swimming pools, stucco, and brick. Ceramic fortified for the ultimate in waterproof protection. Specially formulated to resist mildew growth, with the incorporation of a nonhazardous green biocide, on the paint film. Stops 12 P.S.I., that's greater than a wall of water 26 ft. high. Tested to ASTM D-7088 resistance to hydrostatic pressure and ASTM D-6904 resistance to wind driven rain. recommended use: Interior, exterior, above or below grade masonry walls, basement walls, retaining walls, foundations, landscape walls, cinder blocks, concrete blocks, stucco, and brick. Clean up with soap and water. Coverage: 75 to 100 sq. ft. per gallon. Tintable with 50% of color formula. Not to exceed 2 fl. oz. of colorant per gallon.
$33.99

Drylok White Basement & Masonry Waterproofer Concrete Sealer, 5 Gal.

SKU: 794265
UPC: 00079941286156
Smoother waterproof paint is perfect for the most demanding conditions. Fully transferable 15 year warranty. Ideal for interior, exterior, above or below grade masonry walls, basement walls, retaining walls, foundations, landscape walls, cinder blocks, concrete blocks, bare concrete swimming pools, stucco, and brick. Ceramic fortified for the ultimate in waterproof protection. Specially formulated to resist mildew growth, with the incorporation of a nonhazardous green biocide, on the paint film. Stops 12 P.S.I., that's greater than a wall of water 26 ft. high. Tested to ASTM D-7088 resistance to hydrostatic pressure and ASTM D-6904 resistance to wind driven rain. recommended use: Interior, exterior, above or below grade masonry walls, basement walls, retaining walls, foundations, landscape walls, cinder blocks, concrete blocks, stucco, and brick. Clean up with soap and water. Coverage: 75 to 100 sq. ft. per gallon. Tintable with 50% of color formula. Not to exceed 2 fl. oz. of colorant per gallon.
$149.99

Drylok Wetlook Clear Concrete Sealer, 1 Gal.

SKU: 794257
UPC: 00079941289133
Just like natural and man-made stone, concrete and masonry are porous materials that will start to break down, dust, pit, crack, and/or stain when subjected to weather, water, oil, and UV rays. The only way to prevent damage and deterioration is to protect your surfaces with a good quality sealer. DRYLOK® WetLook High Gloss Sealer is a clear, non-yellowing, water-base sealer formulated for use on horizontal and vertical masonry surfaces where a high gloss, wet look finish is desired. DRYLOK® WetLook High Gloss Sealer is a premium quality finish that protects and beautifies stucco, brick, bare or painted concrete, pavers, stamped concrete, and exposed aggregate, as well as natural and artificial stone. Resists de-icing salts;SaltLok® Technology helps prevent the leaching of minerals and salt. Use on bare masonry or previously painted surfaces. Interior/exterior. Dry time: 1 hour. Coats: 1 is recommended, 2 maximum.
$31.99

Drylok Clear Concrete Sealer Protector, 1 Gal.

SKU: 784902
UPC: 00079941299132
Just like natural and man-made stone, concrete and masonry are porous materials. They will start to break down, dust, pit, crack, and/or stain easily when subjected to weather, water, oil, and UV rays. The only way to prevent damage and deterioration is to protect surfaces with a good quality sealer. Latex base DRYLOK Concrete Protector provides clear, weatherproof protection against deterioration caused by de-icing salts, household cleaners, acid, gasoline, oil, and weathering. Formulated with our exclusive SALTLOK Technology, it penetrates into the surface and provides superior resistance to unsightly efflorescence stains (salt deposits) that are often visible on brick, block, and poured concrete surfaces. Protect interior, exterior, vertical, and horizontal masonry surfaces like stucco, brick and concrete. Prevents excessive dusting, surface cracking and pock marking. Use on bare masonry or previously painted surfaces. Application tools: brush, roller, spray, squeegee, pad applicator. Dry time: 1 hour. Recoat time: 6 hours. Coats: 1-2.
$28.49

Drylok Clear Concrete Sealer Protector, 5 Gal.

SKU: 779471
UPC: 00079941299156
Just like natural and man-made stone, concrete and masonry are porous materials. They will start to break down, dust, pit, crack, and/or stain easily when subjected to weather, water, oil, and UV rays. The only way to prevent damage and deterioration is to protect surfaces with a good quality sealer. Latex base DRYLOK Concrete Protector provides clear, weatherproof protection against deterioration caused by de-icing salts, household cleaners, acid, gasoline, oil, and weathering. Formulated with our exclusive SALTLOK Technology, it penetrates into the surface and provides superior resistance to unsightly efflorescence stains (salt deposits) that are often visible on brick, block, and poured concrete surfaces. Protect interior, exterior, vertical, and horizontal masonry surfaces like stucco, brick and concrete. Prevents excessive dusting, surface cracking and pock marking. Use on bare masonry or previously painted surfaces. Application tools: brush, roller, spray, squeegee, pad applicator. Dry time: 1 hour. Recoat time: 6 hours. Coats: 1-2.
$134.99
All Categories