Light Fixture Parts

Twin cluster fixture socket. 1/8-IP Male threads on each end. Medium-base, 6-inch wire loads. 18-gauge, 105 degree leads, 660 watts/250 volts. 4-1/2 inches high. UL (Underwriter's Laboratories) listed.

Electrified candlestick and bottle adapter. Ideal for turning a favorite bottle into a lamp. Contains: 8 Ft./18 Ga. cord set, push-through medium base socket, bottle adapters, and hardware. UL (Underwriter's Laboratories) listed.

Modern canopy kit. 5" diameter and 7/16" center close hole. Kit includes 1 canopy, 1 screw collar loop, 2 mounting screws, 1 lock washer, and 1 locknut. White finish.

Ceiling blank-up kit: Canopy, 1/8 IP x 2-1/2" nipple, 3/8 IP x 1/8 IP reducing bushing, and 1 cap nut. 7/16" center hole. White. Not for hanging, cover only.

Lighting fixture canopy with 7/16" hole, screw collar loop, mounting screws, crossbar, locknut, and washer. 5-1/8" diameter. 1 per card.

Lighting fixture canopy with 7/16" hole, screw collar loop, mounting screws, crossbar, locknut, and washer. 5-1/8" diameter. 1 per card.

Lighting fixture canopy with 7/16" hole, screw collar loop, mounting screws, crossbar, locknut, and washer. 5-1/8" diameter. 1 per card.

Snap-in lamp socket that fits into 7/8-inch x 1/4-inch hole standard base. CSA (Canadian Standards Association) and UL (Underwriter's Laboratories) listed.

Snap-in lamp socket fits into 3/8-inch x 1/4-inch hole. Compatible with medium base incandescent light bulbs. CSA (Canadian Standards Association) and UL (Underwriter's Laboratories) listed.

Assorted length zinc-plated steel all-thread nipples for lamps and fixtures. Includes (2) 1/2 In., (2) 1 In., (2) 1-1/2 In., (2) 2 In.

Assorted length zinc-plated steel all-thread nipples for lamps and fixtures. Includes (2) 3/4 In., (2) 1-1/2 In., (2) 2 In.

Brass finished socket key replacement lamp knob. Complements many traditional floor and table light fixtures. 1/2-inch extension, tapped 4/36-F x 4/36-M.

Replacement knobs and 1/2-inch extensions for lamps and light fixtures. Tapped 4/36 F x 4/36 M, black knobs.

Detachable lamp harp compatible with a wide variety of lamps. Polished brass finish.

Detachable lamp harp compatible with a wide variety of lamps. Polished brass finish.

Detachable lamp harp compatible with a wide variety of lamps. Polished brass finish.

Ideal kit to repair a favorite lamp. Includes 10-inch brass-plated detachable harp, 8-foot 18-gauge cord set, socket, finial, and all hardware. UL (Underwriter's Laboratories) listed.

Ideal kit to repair a favorite lamp. Includes 10-inch brass-plated detachable harp, 8-foot 18-gauge cord set, socket, finial, and all hardware. UL (Underwriter's Laboratories) listed.

Threaded steel lamp nipple. Ideal for use when constructing a new lamp or repairing an old one. Threaded 1/8-IP.

(2) 4-inch long white plastic candle lamp socket covers. Ideal to replace old socket covers in lamp fixtures.

(2) 4-inch long white plastic candle lamp socket covers. Ideal to replace old socket covers in lamp fixtures.

2 adjustable keyless sockets. Ideal to replace a worn or broken socket. Keyless design works well for Williamsburg style chandeliers or sconces. 1/8 IP threaded hickey candelabra base. Adjust from 3-1/4 In. to 4-3/4 In. CSA (Canadian Standards Association) and UL (Underwriter's Laboratories) listed.

Two 2-inch keyless lamp sockets. Features 1/8 IP threaded hickey candelabra base. UL (Underwriter's Laboratories) listed.

Medium base keyless lamp socket, with 1/8 IP threaded hickey for exterior fixtures. Porcelain construction. UL (Underwriter's Laboratories) listed.

Brass turn-knob socket for lamps with light in base and top. Ideal to replace worn or broken sockets in light fixtures. Threaded 1/8 IP medium base. Rated for 250 watts/250 volts. UL (Underwriter's Laboratories) listed.