This hanger features patented double shear nailing, which distributes the load through 2 points on each joist nail for greater strength. It also allows for the use of fewer nails, faster installation, and the use of common nails for all connections. 18-gauge galvanized steel. Some double shear joist hangers are available in ZMAX coating.
Panel Sheathing Clips are used to brace unsupported panel edges when sheathing meets edge-to-edge without a rafter for support. Select the same size sheathing clip as the panel thickness. Keeps panels even for a level plain on the structure. Quick installation, no nails needed. Provides a 1/8" gap between plywood panels as recommended by the American Plywood Association. 20-gauge galvanized steel.
Panel Sheathing Clips are used to brace unsupported panel edges when sheathing meets edge-to-edge without a rafter for support. Select the same size sheathing clip as the panel thickness. Keeps panels even for a level plain on the structure. Quick installation, no nails needed. Provides a 1/8" gap between plywood panels as recommended by the American Plywood Association. 20-gauge galvanized steel.
Wraps around the wood members from 2 directions - eliminating the need for angle bracing. Ideal for rectangular frame construction and wood projects with right angles. Connects (2) 2x members at a 90 deg. angle. Galvanized steel. Some sizes are available in ZMAX coating.
Wraps around the wood members from 2 directions - eliminating the need for angle bracing. Ideal for rectangular frame construction and wood projects with right angles. Connects (2) 2x members at a 90 deg. angle. Galvanized steel. Some sizes are available in ZMAX coating.
Used to reinforce right angle connections. Fastens wood to wood. This product is made to help resist lateral forces. Great for home repair projects. 90 deg. angle. Galvanized steel. Some sizes available with ZMAX coating.
Simpson Strong-Tie LSSU series of hangers may be sloped and skewed in the field, offering a versatile solution for attaching joists and rafters. These hangers may be sloped up or down and skewed left or right up to 45 deg.. Use all specified fasteners. Galvanized. 18-gauge. Joist width 2-1/16".
Used to reinforce right angle connections. Fastens wood to wood. This product is made to help resist lateral forces. Great for home repair projects. 90 deg. angle. Galvanized steel. Some sizes available with ZMAX coating.
Used to reinforce right angle connections. Fastens wood to wood. This product is made to help resist lateral forces. Great for home repair projects. 90 deg. angle. Galvanized steel. Some sizes available with ZMAX coating.
Speed prong makes installation easier and faster. 90 deg. angle designed for 2x3 and 2x4 framing projects. Install with 8-8d x 1-1/2" nails. 18-gauge galvanized steel. Also available with ZMAX coating.
This anchor's exclusive bending slot allows instant, accurate field bends for all 2-way and 3-way ties. Balanced, completely reversible design permits the A35 series angle to secure a great variety of connections. Used to reinforce 90 deg. connections. 18-gauge galvanized steel. Also available with ZMAX coating.
Used to reinforce right angle connections. Fastens wood to wood. This product is made to help resist lateral forces. Great for home repair projects. 90 deg. angle. Galvanized steel. Some sizes available with ZMAX coating.
Used to reinforce right angle connections. Fastens wood to wood. This product is made to help resist lateral forces. Great for home repair projects. 90 deg. angle. Galvanized steel. Some sizes available with ZMAX coating.
Used to reinforce right angle connections. Fastens wood to wood. This product is made to help resist lateral forces. Great for home repair projects. 90 deg. angle. Galvanized steel. Some sizes available with ZMAX coating.
Secures 2 wood members forming a 90 deg (degree) corner to a vertical post. This product is ideal for the construction of workbenches and storage shelving units. 18-gauge galvanized steel. Some sizes available with ZMAX coating. No RTC2Z: Install with 6-sd8 x 1-1/4" on post and 6-SD8 x 1-1/4" on joist or 6-SC9 x 1-1/2" on post and 6-SD9 x 1-1/2" on joist. No. RTC22Z: Install with 5-SD8 x 1.25" screws on post and 6-SD8 x 1.25" screws on joist. No. RTC24: Install with 9-SD8 x 1.25" screws on post and 11-SD8 x 1.25" screws on joist. No. RTC42: Heavy-duty. Install with 14-SD8 x 1.25" screws on post and 11-SD8 x 1.25" screws on joist or 14-16d nails in post and 8-10d x 1-1/2" nails in joist.
The IUS is a hybrid hanger that incorporates the advantages of the face mount and top mount hanger. Installation is fast with the Strong-Grip seat, easy-to-reach face nail locations, and self-jigging locator tabs. The improved IUS is now fully compatible with shallow flange I-joists. Locator tabs are not structural. They may be bent back to adjust for hanger placement. I-joists with web stiffeners or rectangular sections can be used with the installation of 2-10d x 1-1/2" joist nails into the optional triangle holes. 18-gauge galvanized steel.
Wraps around the wood members from 2 directions - eliminating the need for angle bracing. Ideal for rectangular frame construction and wood projects with right angles. Connects (2) 2x members at a 90 deg. angle. Galvanized steel. Some sizes are available in ZMAX coating.
Most models have triangle and round holes. To achieve maximum loads, fill both round and triangle holes with common nails. These heavy-duty connectors are designed for schools and other structures requiring additional strength, longevity, and safety factors. 14-gauge galvanized steel.
For alignment control between a roof truss and non-bearing walls; the 1-1/2" slot permits vertical truss chord movement when loads are applied. 1-1/4" W. x 2-3/4" H. x 1-7/8" D.
All hangers in this series have double shear nailing - an innovation that distributes the load through 2 points on each joist nail for greater strength. This allows for fewer nails, faster installation, and the use of all common nails for the same connection. Nails must be driven at an angle through the joist or truss into the header to achieve the table loads. Not designed for welded or nailer applications. Galvanized. 14-gauge.
Panel Sheathing Clips are used to brace unsupported panel edges when sheathing meets edge-to-edge without a rafter for support. Select the same size sheathing clip as the panel thickness. Keeps panels even for a level plain on the structure. Quick installation, no nails needed. Provides a 1/8" gap between plywood panels as recommended by the American Plywood Association. 20-gauge galvanized steel.
The versatile THJA26 can accommodate right or left hand hips (at 45 degree skews), and can be installed before or after the hip and jack. Can also be used for double (terminal) hips. Galvanized for extra corrosion resistance. Install with the following fasteners: (20) 16d common nails into the Carrying Member; (6) 10d x 1-1/2" into the Hip; or (4) 10d x 1-1/2" into the Jack.