Search

Foundation & Post Hardware

View as Grid List
Sort by
Display per page

Simpson Strong-Tie 4 In. x 4 In. 18 ga Galvanized Post Cap

SKU: 105683
UPC: 00044315054006
These connectors are always installed in pairs and connect 4x or 6x wood members at right angles. Eliminates driving nails into end grain. Nails can be added in the triangle holes to increase uplift load capacity. 18-gauge galvanized steel. Some sizes available with ZMAX coating.
$3.79

Simpson Strong-Tie 6 In. x 6 In. 18 ga Galvanized Post Cap

SKU: 106986
UPC: 00044315055003
These connectors are always installed in pairs and connect 4x or 6x wood members at right angles. Eliminates driving nails into end grain. Nails can be added in the triangle holes to increase uplift load capacity. 18-gauge galvanized steel. Some sizes available with ZMAX coating.
$4.29

Simpson Strong-Tie 6x 18 ga Galvanized Adjustable Post Cap

SKU: 107734
UPC: 00044315057007
These connectors are always installed in pairs and connect 6X lumber at right angles. Eliminates driving nails into end grain. Nails can be added in triangle holes to increase uplift load capacity. Install with (Min) 8-16d fastener on beam, 6-16d on post; (max) 10-16d fastener on beam, 10-16d on post. 6-1/2" L 18-gauge galvanized steel. Box contains 20 lefts and 20 rights.
$5.29

Simpson Strong-Tie 4 In. x 6 In. 12 ga base Z-Max Post Base

SKU: 107388
UPC: 00044315064968
Embed into wet concrete up to the bottom of the 1" standoff base plate. A 2" minimum side cover is required to obtain the full load. Holes in the bottom of the straps allow for free concrete flow. Post bases do not provide adequate resistance to prevent members from rotating about the base and therefore are not recommended for non top-supported installations (such as fences or carports). Galvanized steel. 12-gauge base. Some sizes available with ZMAX coating. Install with 14-16d commons and (2) 1/2" diameter machine bolts.
$12.79

Simpson Strong-Tie 4 In. x 4 In. 18 ga Galvanized BC Post Cap & Base

SKU: 106995
UPC: 00044315100000
The BC series offers dual purpose post cap/base for light cap or base connections. Do not install bolts into pilot holes. Install with 16d common nails or 16d x 2-1/2" joist hanger nails. Post bases do not provide adequate resistance to prevent members from rotating about the base and are not recommended for non top-supported installations (such as fences or unbraced carports). 18-gauge galvanized steel. Some sizes available in ZMAX coating.
$5.99

Simpson Strong-Tie 4 In. x 4 In. 18 ga Galvanized Post Cap & Half Base

SKU: 107002
UPC: 00044315100505
The BC series offers dual-purpose post cap/base for light cap or base connections. Do not install bolts into pilot holes. Install with 16d common nails or 16d x 2-1/2" joist hanger nails. Post bases do not provide adequate resistance to prevent members from rotating about the base and are not recommended for non top-supported installations (such as fences or unbraced carports). 18-gauge galvanized steel. Some sizes available with ZMAX coating.
$2.49

Simpson Strong-Tie 4 In. x 6 In. 18 ga Galvanized BC Post Cap & Base

SKU: 107011
UPC: 00044315101007
The BC series offers dual purpose post cap/base for light cap or base connections. Do not install bolts into pilot holes. Install with 16d common nails or 16d x 2-1/2" joist hanger nails. Post bases do not provide adequate resistance to prevent members from rotating about the base and are not recommended for non top-supported installations (such as fences or unbraced carports). 18-gauge galvanized steel. Some sizes available in ZMAX coating.
$13.49

Simpson Strong-Tie 4 In. x 6 In. 18 ga Galvanized BC Post Cap & Base

SKU: 100375
UPC: 00044315101502
The BC series offers dual purpose post cap/base for light cap or base connections. Do not install bolts into pilot holes. Install with 16d common nails or 16d x 2-1/2" joist hanger nails. Post bases do not provide adequate resistance to prevent members from rotating about the base and are not recommended for non top-supported installations (such as fences or unbraced carports). 18-gauge galvanized steel. Some sizes available in ZMAX coating.
$10.49

Simpson Strong-Tie 6 In. x 6 In. 18 ga Galvanized BC Post Cap & Base

SKU: 100530
UPC: 00044315103001
The BC series offers dual purpose post cap/base for light cap or base connections. Do not install bolts into pilot holes. Install with 16d common nails or 16d x 2-1/2" joist hanger nails. Post bases do not provide adequate resistance to prevent members from rotating about the base and are not recommended for non top-supported installations (such as fences or unbraced carports). 18-gauge galvanized steel. Some sizes available in ZMAX coating.
$12.99

Simpson Strong-Tie 6 In. x 6 In. 18 ga Galvanized Post Cap & Half Base

SKU: 100441
UPC: 00044315103506
The BC series offers dual-purpose post cap/base for light cap or base connections. Do not install bolts into pilot holes. Install with 16d common nails or 16d x 2-1/2" joist hanger nails. Post bases do not provide adequate resistance to prevent members from rotating about the base and are not recommended for non top-supported installations (such as fences or unbraced carports). 18-gauge galvanized steel. Some sizes available with ZMAX coating.
$10.99

Simpson Strong-Tie 6 In. x 6 In. 12 ga Z-Max ABU Post Base

SKU: 101552
UPC: 00044315119606
The ABU is an adjustable post base which offers moisture protection and finished hardware appearance. Manufactured with ZMAX steel for enhanced corrosion resistance. These post bases feature a 1" stand-off height above concrete floors, code-required when supporting permanent structures that are exposed to the weather, or water splash, or in basements. They reduce the potential for decay at post and column ends. Post bases do not provide adequate resistance to prevent members from rotating about the base and are not recommended for non top-supported installations (such as fences or unbraced carports).
$38.49

Simpson Strong-Tie 4 In. x 4 In. 14 ga Galvanized Elevated Post Base

SKU: 100576
UPC: 00044315122101
The EPB series provides a connection between a post (or column) for decks, patio covers and other top-supported structures. Added standoff adjustability to suit a variety of applications. Install in wet concrete. Simpson Strong-Tie elevated base plate allows 1 In. to 2-1/2 In. clearance above concrete. 12-gauge base plate, 1-1/16 In. O.D. x 8 In. or 12 In. pipe. Post bases do not provide adequate resistance to prevent members from rotating about the base and therefore are not recommended for non top-supported installations (such as fences or unbraced carports). Simpson Strong-Tie gray paint (may be ordered HDG-hot dip galvanized).
$8.99

Simpson Strong-Tie 4 In. x 4 In. 7 ga Galvanized Column Base

SKU: 100060
UPC: 00044315151002
Simpson Strong-Tie column bases, install all models with bottom of base plate flush with the concrete. Post bases do not provide adequate resistance to prevent members from rotating about the base and therefore are not recommended for non top-supported installations (such as fences or unbraced carports). Strap is 7-gauge x 2" width. Base is 7-gauge.
$16.79

Simpson Strong-Tie 4 In. x 6 In. 7 ga Galvanized Column Base

SKU: 107761
UPC: 00044315152009
Simpson Strong-Tie column bases, install all models with bottom of base plate flush with the concrete. Post bases do not provide adequate resistance to prevent members from rotating about the base and therefore are not recommended for non top-supported installations (such as fences or unbraced carports). Strap is 7-gauge x 2" width. Base is 7-gauge.
$15.49

Simpson Strong-Tie 6 In. x 6 In. 7 ga Galvanized Column Base

SKU: 100761
UPC: 00044315154201
Simpson Strong-Tie column bases, install all models with bottom of base plate flush with the concrete. Post bases do not provide adequate resistance to prevent members from rotating about the base and therefore are not recommended for non top-supported installations (such as fences or unbraced carports). Strap is 7-gauge x 2" width. Base is 7-gauge.
$28.80

Simpson Strong-Tie 6 In. x 6 In. 7 ga Hot Dipped Galvanized Column Base

SKU: 100514
UPC: 00044315164507
Simpson Strong-Tie column bases, install all models with bottom of base plate flush with the concrete. Post bases do not provide adequate resistance to prevent members from rotating about the base and therefore are not recommended for non top-supported installations (such as fences or unbraced carports). Strap is 7-gauge x 2" width. Base is 7-gauge.
$57.99

Simpson Strong-Tie 4 In. x 4 In. 7 ga Gray Paint End Column Cap

SKU: 100827
UPC: 00044315191008
Column caps provide a strong connection for column-beam combinations. This design uses Strong-Drive SDS Heavy-Duty Connector screws to provide faster installation and provides a greater net section area of the column compared to bolts. The SDS screws provide for a lower profile compared to standard through bolts.
$42.40

Simpson Strong-Tie 4 In. x 4 In. 12 ga Gray Paint Elevated Post Base

SKU: 107770
UPC: 00044315202001
The EPB series provides a connection between a post (or column) for decks, patio covers and other top-supported structures. Added standoff adjustability to suit a variety of applications. Install in wet concrete. Simpson Strong-Tie elevated base plate allows 1 In. to 2-1/2 In. clearance above concrete. 12-gauge base plate, 1-1/16 In. O.D. x 8 In. or 12 In. pipe. Post bases do not provide adequate resistance to prevent members from rotating about the base and therefore are not recommended for non top-supported installations (such as fences or unbraced carports). Simpson Strong-Tie gray paint (may be ordered HDG-hot dip galvanized).
$10.49

Simpson Strong-Tie 6 In. x 6 In. 12 ga Gray Paint Elevated Post Base

SKU: 100491
UPC: 00044315204005
The EPB series provides a connection between a post (or column) for decks, patio covers and other top-supported structures. Added standoff adjustability to suit a variety of applications. Install in wet concrete. Simpson Strong-Tie elevated base plate allows 1 In. to 2-1/2 In. clearance above concrete. 12-gauge base plate, 1-1/16 In. O.D. x 8 In. or 12 In. pipe. Post bases do not provide adequate resistance to prevent members from rotating about the base and therefore are not recommended for non top-supported installations (such as fences or unbraced carports). Simpson Strong-Tie gray paint (may be ordered HDG-hot dip galvanized).
$16.49

Simpson Strong-Tie 4 In. x 4 In. 16 ga Galvanized End Post Cap

SKU: 107077
UPC: 00044315205101
The EPC cap provides a custom connection for post-beam combinations at medium design loads. Minimum 4x4 post size. 3-9/16" W1 x 3-9/16" W2 x 2-5/8" L1 x 11" L2 x 7-5/16" L3. Use 16d fasteners. Do not install bolts into pilot holes. 16-gauge galvanized steel.
$10.49

Simpson Strong-Tie 6 In. x 4 In. 16 ga Galvanized End Post Cap

SKU: 100824
UPC: 00044315209109
The EPC cap provides a custom connection for post-beam combinations at medium design loads. Minimum 4x4 post size. 3-9/16" W1 x 3-9/16" W2 x 2-5/8" L1 x 11" L2 x 7-5/16" L3. Use 16d fasteners. Do not install bolts into pilot holes. 16-gauge galvanized steel.
$27.24

Simpson Strong-Tie 6 In. x 6 In. 16 ga Galvanized End Post Cap

SKU: 100829
UPC: 00044315210105
The EPC cap provides a custom connection for post-beam combinations at medium design loads. Minimum 4x4 post size. 3-9/16" W1 x 3-9/16" W2 x 2-5/8" L1 x 11" L2 x 7-5/16" L3. Use 16d fasteners. Do not install bolts into pilot holes. 16-gauge galvanized steel.
$27.24

Simpson Strong-Tie 4 In. x 4 In. 7 ga Hot Dipped Galvanized Column Base

SKU: 107752
UPC: 00044315228209
Simpson Strong-Tie column bases, install all models with bottom of base plate flush with the concrete. Post bases do not provide adequate resistance to prevent members from rotating about the base and therefore are not recommended for non top-supported installations (such as fences or unbraced carports). Strap is 7-gauge x 2" width. Base is 7-gauge.
$23.49

Simpson Strong-Tie 6 In. x 6 In. 12 ga base Z-Max Post Base

SKU: 107397
UPC: 00044315329401
Embed into wet concrete up to the bottom of the 1" standoff base plate. A 2" minimum side cover is required to obtain the full load. Holes in the bottom of the straps allow for free concrete flow. Post bases do not provide adequate resistance to prevent members from rotating about the base and therefore are not recommended for non top-supported installations (such as fences or carports). Galvanized steel. 12-gauge base. Some sizes available with ZMAX coating. Install with 14-16d commons and (2) 1/2" diameter machine bolts.
$18.49

Simpson Strong-Tie 4 In. x 4 In. 18 ga Z-Max Post Cap

SKU: 105740
UPC: 00044315337208
These connectors are always installed in pairs and connect 4x or 6x wood members at right angles. Eliminates driving nails into end grain. Nails can be added in the triangle holes to increase uplift load capacity. 18-gauge galvanized steel. Some sizes available with ZMAX coating.
$8.79
All Categories