Fittings & Adapters

Hose plug. Closes off ends of hose and allows for flushing. For water pressure up to 60 psi (pounds per square inch). Closes ends of poly hose when frequent flushing is necessary.

Compression tee used to establish branch circuits in drip irrigation systems.

Used to establish a 1/4 In. branch from a 1/4 In. tube or (2) 1/4 In. branches from a 1/2 In. hose. Double barb design allows for water pressures up to 50 psi (pounds per square inch).

Used to join 2 lengths of drip line tubing. Can be used with water pressure up to 60 psi (pounds per square inch). Compression fitting.

Use to join 2 lengths of tubing or to establish a single branch off a hose. Exclusive double barb design allows use with higher water pressures.

Used to make 90 degree turns in 1/4 In. tubing. Double barbed design allows water pressures up to 50 psi (pounds per square inch).

Used to make 90 degree turns in drip tubing. Can be used with water pressure up to 60 psi (pounds per square inch).

Connects tubing to faucet or other 3/4 In. male thread in drip irrigation systems. Can also be used with anti-siphons, pressure regulators, Y filters, and automatic timers. Includes filter washer.

Connects tubing to faucet or other 3/4 In. male thread in drip irrigation systems. Can also be used with anti-siphons, pressure regulators, Y filters, and automatic timers. Includes filter washer.

Connects tubing to faucet or other 3/4 In. male thread in drip irrigation systems. Can also be used with anti-siphons, pressure regulators, Y filters, and automatic timers. Includes filter washer.

Connects tubing to faucet or other 3/4 In. male thread in drip irrigation systems. Can also be used with anti-siphons, pressure regulators, Y filters, and automatic timers. Includes filter washer.

Connects tubing to faucet or other 3/4 In. male thread in drip irrigation systems. Can also be used with anti-siphons, pressure regulators, Y filters, and automatic timers. Includes filter washer.

Drip irrigation swivel tee. Connects drip tubing to threaded sprinkler riser. Rated for water pressure up to 60 psi (pounds per square inch).

Drip irrigation swivel tee. Connects drip tubing to threaded sprinkler riser. Rated for water pressure up to 60 psi (pounds per square inch).

Fits 1/2" and 3/4" risers. Converts 1/2" sprinkler riser to a 1/2" single drip manifold. Connects one 1/2" poly hose to a 1/2" sprinkler riser. Includes: Elbow, filter, 3-way connector, and 2 flow controls. 1 per card.

Connects low-volume sprinklers to 1/2 In. MPT (male pipe thread). Inlet: 1/2 In. FPT (female pipe thread). Outlet: 10-32 female thread. Includes filter washer. 1 per card.

Drip irrigation swivel tee. Connects drip tubing to threaded sprinkler riser. Rated for water pressure up to 60 psi (pounds per square inch).

1/4 In. drip line tap-off for a 1/2 In. sprinkler riser. Connects 1/4 In. tubing to an existing 1/2 In. male pipe thread underground sprinkler riser. Includes filter cone. 1 per card.

Coupling joins 2 different size hoses by compression fitting. 1/2 In. tubing to 5/8 In. tubing. Color coded 1/2 In. (green) x 5/8 In. (black) compression ring. 1 per card.

Used to join hose directly to PVC fitting or pipe. Adapts connections to a water source. Standard PVC glue and primer required. 3 per card.

Used to join hose directly to PVC fitting or pipe. Adapts connections to a water source. Standard PVC glue and primer required. 3 per card.

Glue-in compression adapter glues PVC (polyvinyl chloride) fitting to convert to compression adapter. Use to join hose directly to PVC fitting or pipe.

Glue-in compression adapter glues PVC (polyvinyl chloride) fitting to convert to compression adapter. Use to join hose directly to PVC fitting or pipe.

Barbed cross coupling. Use to create a 4-way intersection with 1/4 In. tubing. Double barbed design allows use with higher water pressures.

Raindrip professional pressure regulator. Suitable only for drip watering systems, sprinklers, and misters. Preset for a constant psi (pounds per square inch).