Drip Irrigation

Attaches to pipe riser to irrigate trees and shrubs. Solid brass construction. Adjustable flow and radius.

Raindrip adjustable bubbler. Adjustable stream spray bubbler on a 13 In. stake with 2 Ft. of 1/4 In. feeder hose. Flow rates and height are adjustable. Features Clamp-N-Pierce tool-free connection system. Ready to install on existing poly tubing supply line.

Raindrip adjustable bubbler. Adjustable stream spray bubbler on a 13 In. stake with 2 Ft. of 1/4 In. feeder hose. Flow rates and height are adjustable. Features Clamp-N-Pierce tool-free connection system. Ready to install on existing poly tubing supply line.

Turbulent flow pressure compensating drippers. Each individual dripper maintains a constant flow rate. Inlet pressures range from 15 to 40 psi (pounds per square inch). These drippers can be used at the end of 1/4 In. tubing feeders or inserted directly into supply hose. Supply hose may be buried and the water ported up to the ground surface with a length of 1/4 In. tubing. Use 1/2 (gallons per hour) GPH for heavy (clay) soil, 1 GPH for medium (loam) soil, and 2 GPH for light (sandy) soil.

Turbulent flow pressure compensating drippers. Each individual dripper maintains a constant flow rate. Inlet pressures range from 15 to 40 psi (pounds per square inch). These drippers can be used at the end of 1/4 In. tubing feeders or inserted directly into supply hose. Supply hose may be buried and the water ported up to the ground surface with a length of 1/4 In. tubing. Use 1/2 (gallons per hour) GPH for heavy (clay) soil, 1 GPH for medium (loam) soil, and 2 GPH for light (sandy) soil.

Turbulent flow pressure compensating drippers. Each individual dripper maintains a constant flow rate. Inlet pressures range from 15 to 40 psi (pounds per square inch). These drippers can be used at the end of 1/4 In. tubing feeders or inserted directly into supply hose. Supply hose may be buried and the water ported up to the ground surface with a length of 1/4 In. tubing. Use 1/2 (gallons per hour) GPH for heavy (clay) soil, 1 GPH for medium (loam) soil, and 2 GPH for light (sandy) soil.

Ideal for vegetables and other plants in rows including raised beds. Use only with 1/4 In. tubing.

Ideal for vegetables and other plants in rows including raised beds. Use only with 1/4 In. tubing.

Use to convert 1/2 In. underground sprinklers to a micro irrigation drip system. Screw manifold directly onto a 1/2 In. sprinkler riser to convert to a 6 outlet manifold for 1/4 In. drip tubing. Ideal for watering up to 6 plants with only 1 unit. Micro irrigation emitter contains 6 pressure-compensating ports. Provides equal water flow at 1 GPH (gallons per hour) for each outlet. Unique insert prevents tubing kinks and outlet damage. Female threaded connection. Ultra violet inhibitors minimize polymer breakdown when used in outdoor applications. Inlet: 1/2 In. Female pipe thread, outlet: 4 recessed ports for 1/4 In. tubing.

Adjustable bubbler. Waters from adjustable outlets. This feature allows the higher flow rates required when watering large and small plants on the same circuit. 1/2 In. female pipe thread inlet. Includes 6 In. stake with pre-installed barbed inlet for an easy connection to tubing.

Adjustable bubbler. Waters from adjustable outlets. This feature allows the higher flow rates required when watering large and small plants on the same circuit. 1/2 In. female pipe thread inlet. Includes 6 In. stake with pre-installed barbed inlet for an easy connection to tubing.

Convert existing 1/2" underground sprinkler systems to low-flow watering where a drip-circuit cannot be set up. Features a full-circle stream-spray with a maximum spray diameter of 3' at 30 psi (pounds per square inch). Flow rate is adjustable from 0 to 13 GPH (gallons per hour) at 30 psi. Inlet provides a secure fit and easy connection.

Convert existing 1/2" underground sprinkler systems to low-flow watering where a drip-circuit cannot be set up. Features a full-circle stream-spray with a maximum spray diameter of 3' at 30 psi (pounds per square inch). Flow rate is adjustable from 0 to 13 GPH (gallons per hour) at 30 psi. Inlet provides a secure fit and easy connection.

Adjustable mister and 4 In. high-density polyethylene risers with 1/4 In. barbed adapters. Adjustable from a fine to a heavy mist up to 3 Ft. circle. Flow rate: 4 to 7 GPH (gallons per hour) at 25 psi (pounds per square inch).

Ideal for flowers, ground cover, and hillsides. Uniformly sprays water over desired area. Use with R382CT, R382CB, 382005B, 382010B, 384R0UB, R336C, R336CT and R336CB.

Ideal for flowers, ground cover, and hillsides. Uniformly sprays water over desired area. Use with R382CT, R382CB, 382005B, 382010B, 384R0UB, R336C, R336CT and R336CB.

Ideal for flowers, ground cover, and hillsides. Uniformly sprays water over desired area. Use with R382CT, R382CB, 382005B, 382010B, 384R0UB, R336C, R336CT and R336CB.

Designed for ground cover, seed germination, and hillside applications where routing of drippers to base of each plant is impractical. Operating pressure range: 15 to 70 psi (pound per square inch). Includes heavy-duty 8 In. stakes with 4 In. risers.

Designed for ground cover, seed germination, and hillside applications where routing of drippers to base of each plant is impractical. Operating pressure range: 15 to 70 psi (pound per square inch). Includes heavy-duty 8 In. stakes with 4 In. risers.

Uniformly sprays individual streams over a circular area with an adjustable diameter. Ideal for watering ground cover, hillsides, flower beds, new plantings, and seed germination. Sprayer inlet: 10 to 32 NFT (national female thread).

Ideal to use for watering ground cover, hillsides, flower beds, new plantings, and seed germination where routing of drippers to base of each plant is impractical. Features adjustable flow rate from 4 to 20 GPH (gallons per hour) and spray radius of up to 15 Ft. Sprayer inlet: 10 to 32 NFT. Uniformly sprays water over a full circle.

Uniformly sprays individual streams over a circular area with an adjustable diameter. Ideal for watering ground cover, hillsides, flower beds, new plantings, and seed germination. Sprayer inlet: 10 to 32 NFT (national female thread).

Uniformly sprays individual streams over a circular area with an adjustable diameter. Ideal for watering ground cover, hillsides, flower beds, new plantings, and seed germination. Sprayer inlet: 10 to 32 NFT (national female thread).

Waters (2) 30 degree patterns each with a radius up to 8 Ft. Adjustable length of up to 16 Ft. x 4 Ft. Sprayer inlet: 10-32 NFT (national female thread). 5 per card.

Drip hose manufactured from linear, low-density polyethylene. Contains ultra violet inhibitors which enables it to be left out year-round, buried or on the surface in any weather. It is the primary line for most drip installations.