Concrete Forms & Molds

Use where concrete meets concrete to prevent cracking on sidewalks, driveways, patios, retaining walls, etc. Also, an excellent sill plate and top plate sealer. Manufactured with cane fibers and saturated with asphalt, it is insect, decay and weather-resistant with low water absorption properties and no damage from freeze/thaw cycles. Compresses to 50% of its thickness and expands to 70% of its thickness. Bonds well to poured concrete, won't work loose during expansion and contraction. Easily cut and trimmed to any size or shape with standard tools. 1/2" T. x 4" W. x 5' L.; 40-pieces per carton.

DIY mold for making walks, patios, courtyards, and terraces. No special skills required. Fill mold with concrete, smooth surface, and remove mold. Takes only minutes to complete a 2' x 2' section. One 80 lb. bag concrete mix will fill a 2' x 2' section of the Walk Maker.

DIY mold for making walks, patios, courtyards, and terraces. No special skills required. Fill mold with concrete, smooth surface, and remove mold. Takes only minutes to complete a 2' x 2' section. One 80 lb. bag concrete mix will fill a 2' x 2' section of the Walk Maker.

10 In. x 48 In. building form is a ridged fiber building form tube that eliminates the need to build wood forms. Engineered from multiple layers of high-quality fiber laminated with an adhesive, with a special coating which resists moisture and facilitates even curing. Use for mailbox bases, deck supports, columns, and more.

Used where a moderate size shelf bracket and reinforcing bracket is needed. When used for tilt-up perimeter forming, the nail hole placement ensures substantial re-use. Holes are sized for 1/4" fasteners or 10d commons. 16-gauge galvanized steel.

The W1 is designed to work with the WT wedge-tie products. These products help keep form boards together during construction. Reusable after the footing is poured. Especially designed for low foundation wall applications.Made of 14-gauge galvanized steel.

The W1 is designed to work with the WT wedge-tie products. These products help keep form boards together during construction. Reusable after the footing is poured. Especially designed for low foundation wall applications.Made of 14-gauge galvanized steel.

Designed for low foundation wall applications. 5/8" wide formed V design for rigidity allows accurate form spacing and support. Use (2) 3-1/2" long wedges for each tie. Used with 2x solid sawn lumber. Not recommended for wall pours greater than 4' high. 18-gauge galvanized steel.

Designed for low foundation wall applications. 5/8" wide formed V design for rigidity allows accurate form spacing and support. Use (2) 3-1/2" long wedges for each tie. Used with 2x solid sawn lumber. Not recommended for wall pours greater than 4' high. 18-gauge galvanized steel.

Lightweight, durable closed cell foam expansion joint is stiff enough to use on straight joints, and is flexible enough to shape to contours on concrete applications. Will not break prematurely during job site handling. Has virtually zero water absorption and, because of its foam construction, does not facilitate destructive termites. UV resistant which prevents degradation from the sun. Environmentally friendly product is made from recyclable resins and is CFC and HCFC free. Tear strip can be reused as a backer rod. Works with many sealants. Exceeds ASTM standards D-4819 and D-3575. 50' L. x 1/2" T. Black.

Lightweight, durable closed cell foam expansion joint is stiff enough to use on straight joints, and is flexible enough to shape to contours on concrete applications. Will not break prematurely during job site handling. Has virtually zero water absorption and, because of its foam construction, does not facilitate destructive termites. UV resistant which prevents degradation from the sun. Environmentally friendly product is made from recyclable resins and is CFC and HCFC free. Tear strip can be reused as a backer rod. Works with many sealants. Exceeds ASTM standards D-4819 and D-3575. 50' L. x 1/2" T. Black.