Search

Collated Nails

View as Grid List
Sort by
Display per page

Stinger NailPac 1 In. Roofing Nails with Caps

SKU: 303377
UPC: 00042928154038
1 In. Stinger NailPac for use with Stinger CH100 cap nailer for securing roofing felt and house wrap. Cap nails offers better holding power and faster installation. Caps are a recommended best practice to seal out moisture.
$47.49

Bostitch 18-Gauge Coated Brad Nail, 3/4 In. (3000 Ct.)

SKU: 341687
UPC: 00077914003090
Brad nails have a coated finish with a chisel point. For interior Use. Use with Bostitch tools BTFP12233, SB-1842BN, SB-2IN1, SB-1850BN, BT35B, BT200K-2, BT125K-2, and GBT1850K. Fits most 18-gauge brad nailers.
$12.29

Bostitch 18-Gauge Coated Brad Nail, 1-3/16 In. (3000 Ct.)

SKU: 341673
UPC: 00077914003137
Brad nails have a coated finish with a chisel point. For interior Use. Use with Bostitch tools BTFP12233, SB-1842BN, SB-2IN1, SB-1850BN, BT35B, BT200K-2, BT125K-2, and GBT1850K. Fits most 18-gauge brad nailers.
$11.79

Bostitch 15 Degree Wire Weld Galvanized Coil Siding Nail, 2-1/2 In. x .092 In. (3600 Ct.)

SKU: 358348
UPC: 00077914015086
Coil siding nails for use in cement board siding or fencing applications. Fits most 15 Deg (degree) coil siding/fencing nailers including Hitachi, Makita, Porter-Cable.
$89.99

Bostitch 15 Degree Wire Weld Galvanized Coil Framing Nail, 2 In. x .099 In. (3600 Ct.)

SKU: 300642
UPC: 00077914015659
Framing nail for use in 15 deg (degree) coil framing pneumatic guns.
$62.99

Bostitch 15 Degree Wire Weld Galvanized Coil Siding Nail, 2 In. x .092 In. (3600 Ct.)

SKU: 300421
UPC: 00077914016007
Coil siding nails for use in cement board siding or fencing applications. Fits most 15 Deg (degree) coil siding/fencing nailers including Hitachi, Makita, Porter-Cable.
$78.99

Bostitch 16-Gauge Coated L-Head Flooring Nail, 2 In. (1000 Ct.)

SKU: 300326
UPC: 00077914026334
L-shaped flooring cleats for Bostitch MIIIFN and MFN200 industrial flooring cleat nailer. Coverage: 1000 hardwood flooring cleats per 200 sq. ft. (square foot) of flooring.
$27.99

Bostitch 18-Gauge Coated Brad Nail, 1-1/4 In. (1000 Ct.)

SKU: 300279
UPC: 00077914032182
Brad nails have a coated finish with a chisel point. For interior Use. Use with Bostitch tools BTFP12233, SB-1842BN, SB-2IN1, SB-1850BN, BT35B, BT200K-2, BT125K-2, and GBT1850K. Fits most 18-gauge brad nailers.
$7.49

Bostitch 15-Gauge Bright Basic 34 Degree DA-Style Angled Finish Nail, 1-1/2 In. (4000 Ct.)

SKU: 330310
UPC: 00077914036562
15-gauge DA style angled finish nails have a coated finish that eases penetration resistance and increases holding power. The chisel point preserves the appearance of the work surface in finish applications. Fits competitor tools: DeWalt D5127K, Duo-Fast DAFN-6480, DAFN-6432, Porter-Cable DA250, DA250A, DA250B, Senco SFN30, DFN40, SFN1, A25FN, Stanley SDA250K, and Hitachi NT65AA.
$37.99

Bostitch 15-Gauge Bright 34 Degree DA-Style Angled Finish Nail, 2 In. (4000 Ct.)

SKU: 330558
UPC: 00077914036586
15-gauge DA style angled finish nails have a coated finish that eases penetration resistance and increases holding power. The chisel point preserves the appearance of the work surface in finish applications. Fits competitor tools: DeWalt D5127K, Duo-Fast DAFN-6480, DAFN-6432, Porter-Cable DA250, DA250A, DA250B, Senco SFN30, DFN40, SFN1, A25FN, Stanley SDA250K, and Hitachi NT65AA.
$49.99

Bostitch 15-Gauge Bright Basic 34 Degree DA-Style Angled Finish Nail, 2-1/2 In. (4000 Ct.)

SKU: 330566
UPC: 00077914036609
15-gauge DA style angled finish nails have a coated finish that eases penetration resistance and increases holding power. The chisel point preserves the appearance of the work surface in finish applications. Fits competitor tools: DeWalt D5127K, Duo-Fast DAFN-6480, DAFN-6432, Porter-Cable DA250, DA250A, DA250B, Senco SFN30, DFN40, SFN1, A25FN, Stanley SDA250K, and Hitachi NT65AA.
$54.99

Bostitch 28 Degree Wire Weld Galvanized Ring Shank Offset Round Head Framing Stick Nail, 2 In. x .113 In. (2000 Ct.)

SKU: 301228
UPC: 00077914048886
Full head collated stick framing nails with diamond point and coating for maximum holding power.
$56.99

Bostitch 28 Degree Wire Weld Coated Offset Round Head Framing Stick Nail, 3-1/4 In. x .131 In. (2000 Ct.)

SKU: 300378
UPC: 00077914051619
Full head collated stick framing nails with diamond point and coating for maximum holding power.
$59.99

Bostitch 30 Degree Paper Tape Bright Offset Round Head Framing Stick Nail, 3 In. x .131 In. (2500 Ct.)

SKU: 302161
UPC: 00077914060260
For use in most 30-34 degree paper collated framing nailers. Offset round head, paper tape. Industrial grade carbon steel alloy.
$47.49

Bostitch 30 Deg Paper Tape Galvanized Offset Round Head Framing Stick Nail, 3 In. x .120 In. (2000 Ct.)

SKU: 302181
UPC: 00077914060277
For use in most 30-34 degree paper collated framing nailers. Offset round head, paper tape. Industrial grade carbon steel alloy.
$52.99

Bostitch 30 Degree Paper Tape Bright Offset Round Head Framing Stick Nail, 3-1/4 In. x .120 In. (2500 Ct.)

SKU: 302163
UPC: 00077914060284
For use in most 30-34 degree paper collated framing nailers. Offset round head, paper tape. Industrial grade carbon steel alloy.
$41.99

Porta-Nails 16-Gauge Bright L-Head Flooring Nail, 2 In. (1000 Ct.)

SKU: 356634
UPC: 00726205047021
2", 16-gauge flooring nail. For the tightest floor possible choose the L-PortaNail by PNI. L-Nails are designed specifically for nailing tongue and groove wood floors using the Porta-Nailer Portamatic TL pneumatic nailer. The L head flooring nail or cleat, will fit all domestic and import floor nailers requiring a 2" or 50mm L-nail fastener. The PNI wide head wedge shaped design with well defined barbs prevents the nail from backing out. This design feature provides for the greatest impact and holding power to ensure that your floor lasts a lifetime. Nails are glued into clips to make loading into your tool quick and easy. 1 pack of 1000 PortaNails will nail approximately 200 sq. ft. (square foot) of tongue and groove flooring.
$17.99

Porta-Nails 16-Gauge Bright T-Head Flooring Nail, 2 In. (1000 Ct.)

SKU: 385026
UPC: 00726205426291
For use with decorative paneling, ceilings, sub-flooring and tongue-and-groove 3/4 In. wood floors. Carbon-steel construction prevents nail from bending during installation. Feature wide head wedge-shaped design and well-defined barbs. Cupped point helps the nail cut through wood and avoid splitting. For use with model No. 401 and 402 floor nailers. 1000 nails will fasten approximately 200 sq. ft. (square foot) of 2-1/4 In. wide tongue-and-groove flooring.
$17.49

Senco ProHead 34 Degree Paper Tape Bright Smooth Shank Clipped Head Framing Stick Nail, 2-3/8 In. x .113 In. (2500 Ct.)

SKU: 396605
UPC: 00741474045929
Applications include framing, trusses, subfloors, sheathing, decking, siding, fencing, pallets, crate assembly and wood to concrete. For use in Senco Frame Pro model No. 650/600, SN70, 601, and 701XP, 901XP, and GT90CH cordless nailer. Porter Cable model No. FC350, Hitachi model No. NR-83AA, Paslode model No. 5000 to 5312, 5300, 5325, and 5350, Stan Tech model No. SDN11P7-2, and Fasco model No. FSC-HH31-83.
$37.49

Senco ProHead 34 Degree Paper Tape Hot-Dipped Galvanized Clipped Head Framing Stick Nail, 2-3/8 In. x .113 In. (2500 Ct.)

SKU: 310737
UPC: 00741474045943
Applications include framing, trusses, subfloors, sheathing, decking, siding, fencing, pallets, crate assembly and wood to concrete. For use in Senco Frame Pro model No. 650/600, SN70, 601, and 701XP, 901XP, and GT90CH cordless nailer. Porter Cable model No. FC350, Hitachi model No. NR-83AA, Paslode model No. 5000 to 5312, 5300, 5325, and 5350, Stan Tech model No. SDN11P7-2, and Fasco model No. FSC-HH31-83.
$59.99

Senco ProHead 34 Degree Paper Tape Bright Ring Shank Clipped Head Framing Stick Nail, 2-3/8 In. x .113 In. (2500 Ct.)

SKU: 357022
UPC: 00741474045974
Applications include framing, trusses, subfloors, sheathing, decking, siding, fencing, pallets, crate assembly and wood to concrete. For use in Senco Frame Pro model No. 650/600, SN70, 601, and 701XP, 901XP, and GT90CH cordless nailer. Porter Cable model No. FC350, Hitachi model No. NR-83AA, Paslode model No. 5000 to 5312, 5300, 5325, and 5350, Stan Tech model No. SDN11P7-2, and Fasco model No. FSC-HH31-83.
$36.99

Senco ProHead 34 Degree Paper Tape Bright Clipped Head Framing Stick Nail, 3 In. x .120 In. (2500 Ct.)

SKU: 300545
UPC: 00741474046056
Applications include framing, trusses, subfloors, sheathing, decking, siding, fencing, pallets, crate assembly and wood to concrete. For use in Senco Frame Pro model No. 650/600, SN70, 601, and 701XP, 901XP, and GT90CH cordless nailer. Porter Cable model No. FC350, Hitachi model No. NR-83AA, Paslode model No. 5000 to 5312, 5300, 5325, and 5350, Stan Tech model No. SDN11P7-2, and Fasco model No. FSC-HH31-83.
$45.49

Senco 34 Degree Paper Tape Bright Clipped Head Framing Nail, 3-1/4 In. x .120 In. (2500 Ct.)

SKU: 366160
UPC: 00741474046131
Applications include framing, trusses, subfloors, sheathing, decking, siding, fencing, pallets, crate assembly and wood to concrete. For use in Senco Frame Pro model No. 650/600, SN70, 601, and 701XP, 901XP, and GT90CH cordless nailer. Porter Cable model No. FC350, Hitachi model No. NR-83AA, Paslode model No. 5000 to 5312, 5300, 5325, and 5350, Stan Tech model No. SDN11P7-2, and Fasco model No. FSC-HH31-83.
$64.99

Senco 34 Degree Paper Tape Bright Clipped Head Framing Nail, 3 In. x .131 In. (2500 Ct.)

SKU: 396710
UPC: 00741474046216
Applications include framing, trusses, subfloors, sheathing, decking, siding, fencing, pallets, crate assembly and wood to concrete. For use in Senco Frame Pro model No. 650/600, SN70, 601, and 701XP, 901XP, and GT90CH cordless nailer. Porter Cable model No. FC350, Hitachi model No. NR-83AA, Paslode model No. 5000 to 5312, 5300, 5325, and 5350, Stan Tech model No. SDN11P7-2, and Fasco model No. FSC-HH31-83.
$39.99

Senco ProHead 34 Degree Paper Tape Hot-Dipped Galvanized Clipped Head Framing Stick Nail, 3 In. x .131 In. (2500 Ct.)

SKU: 310513
UPC: 00741474046223
Applications include framing, trusses, subfloors, sheathing, decking, siding, fencing, pallets, crate assembly and wood to concrete. For use in Senco Frame Pro model No. 650/600, SN70, 601, and 701XP, 901XP, and GT90CH cordless nailer. Porter Cable model No. FC350, Hitachi model No. NR-83AA, Paslode model No. 5000 to 5312, 5300, 5325, and 5350, Stan Tech model No. SDN11P7-2, and Fasco model No. FSC-HH31-83.
$72.99
All Categories